sorry if there's already a lot of pc problem threads...
Here are the parts that i bought
Gigabyte GA-965P-DS3 rev.2
VGA BFG 7600GT 256MB
APEVIA ATX-CW500WP4 RT
Intel Core 2 Duo E6300 1.86gb
OCZ DDR2 800 1gbx2 OCZ2G8002GK
Here's the problem:
I installed the mobo, gfx card, ram, on a test bed(old case) and hooked them up with the APEVIA PSU and do a test run to see if everything worked.
I booted up and everything, i was able to go to bios and see the settings no problem.
I took it apart, and also took my old computer apart, and installed the new parts in. (so basically i just changed from one case to another)
It stopped working, I press the power button and most of the time the fan would just spin up and then spin back down, turned off(the thing would just turn on and off).
If it doesnt turn off by itself It would turn on but does not do anything, the monitor wont reg any activity at all.
What i've done:
1. I took out the parts from the case and put it back in the test bed(old case). Same deal now.
2. I took out the gfx card and put in an old pci video card and Same deal.
3. i took off the HSF on the proc and checked the proc, nothing wrong and put it back in and turned the thing back on, Same deal.
side note: while installing the HSF (HSF came with the intel proc) i notice that you couldnt physically push all 4 pins in so it will click, because it would warp the mobo so i push the pins in diagonal order as firmly as i can locked the HSF in place.
any tips, help would be great.
Here are the parts that i bought
Gigabyte GA-965P-DS3 rev.2
VGA BFG 7600GT 256MB
APEVIA ATX-CW500WP4 RT
Intel Core 2 Duo E6300 1.86gb
OCZ DDR2 800 1gbx2 OCZ2G8002GK
Here's the problem:
I installed the mobo, gfx card, ram, on a test bed(old case) and hooked them up with the APEVIA PSU and do a test run to see if everything worked.
I booted up and everything, i was able to go to bios and see the settings no problem.
I took it apart, and also took my old computer apart, and installed the new parts in. (so basically i just changed from one case to another)
It stopped working, I press the power button and most of the time the fan would just spin up and then spin back down, turned off(the thing would just turn on and off).
If it doesnt turn off by itself It would turn on but does not do anything, the monitor wont reg any activity at all.
What i've done:
1. I took out the parts from the case and put it back in the test bed(old case). Same deal now.
2. I took out the gfx card and put in an old pci video card and Same deal.
3. i took off the HSF on the proc and checked the proc, nothing wrong and put it back in and turned the thing back on, Same deal.
side note: while installing the HSF (HSF came with the intel proc) i notice that you couldnt physically push all 4 pins in so it will click, because it would warp the mobo so i push the pins in diagonal order as firmly as i can locked the HSF in place.
any tips, help would be great.