New PC for gaming

verbel

Weaksauce
Joined
May 11, 2005
Messages
98
I am building a new machine. I will be using this mostly for gaming. I'm not really sold on the mobo so all opinions are appreciated.

Mobo = ASUS M2N32-SLI Deluxe Wireless Edition Socket AM2 NVIDIA nForce 590 SLI MCP ATX AMD Motherboard

CPU = AMD Athlon 64 X2 6000+ Windsor 3.0GHz Socket AM2

Video Card = EVGA 512-P2-N773-AR GeForce 8600GTS 512MB 128-bit GDDR3 PCI Express x16 HDCP Ready SLI Supported Video Card

Memory = OCZ Platinum Revision 2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)

This is pretty much all I need I have all the other parts.
 
Do you plan on OC'ing?

What size monitor do you have? What games do you play, if any?

What's your budget?
 
I would downgrade the cpu a little bit and spend more on a better graphics card if you had the choice. but again... it depends on what kind of games you play.
 
I would like to keep my budget under 850. I like to play allot of fps and strategy games along with the occasional rpg. I mainly picked that video card because it seemed to get good reviews and I hoped the 8800's would go down a little in price in the next 90 days and I would use evga's step program. I do not plan on OCing it. I had also considered a Intel build with Intel Core 2 Quad Q6600, but it would cost allot more I think. Aslo would my performance be all that much better? I'm using 2, 19 inch wide screen monitors.
 
I would like to keep my budget under 850. I like to play allot of fps and strategy games along with the occasional rpg. I mainly picked that video card because it seemed to get good reviews and I hoped the 8800's would go down a little in price in the next 90 days and I would use evga's step program. I do not plan on OCing it. I had also considered a Intel build with Intel Core 2 Quad Q6600, but it would cost allot more I think. Aslo would my performance be all that much better? I'm using 2, 19 inch wide screen monitors.

If your budget is $850, and you only need CPU/MOBO/GPU/RAM then you have a lot of things you could buy. Here is what you have:

ASUS M2N32-SLI Deluxe Wireless Edition Socket AM2 NVIDIA nForce 590 SLI MCP ATX AMD Motherboard ~ $135

CPU = AMD Athlon 64 X2 6000+ Windsor 3.0GHz Socket AM2 ~$148

Video Card = EVGA 512-P2-N773-AR GeForce 8600GTS 512MB 128-bit GDDR3 PCI Express x16 HDCP Ready SLI Supported Video Card ~$155

Memory = OCZ Platinum Revision 2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) ~(these ram sticks can be found for more or less around $55 these days).

That's gonna be $493 without taxes and shipping. You could easily upgrade that video card to a Geforce 8800GTS 320MB for only $80 dollars more or so.

If you want to go the C2D route I think you would have enough money to do that also.
 
Easily enough money to get a C2D/Q. Try a P35 mobo and the memory kit the jtdaman recommended.
 
I would like to keep my budget under 850. ... I had also considered a Intel build with Intel Core 2 Quad Q6600, but it would cost allot more I think.

Since you only have two 19" monitors, you don't need SLI. Since you're not planning on OC'ing much, if any at all, you don't need highly OC'able RAM. Here's an alternative Intel build:

$300 - E6850 (zzf) or Q6600 G0 stepping (clubIT)
$130 - GA-P35-DS3R
$290 - eVGA 320-P2-N811-AR GF 8800GTS 320MB (before $20 MIR)
$85 - A-Data 2GB DDR2-800 ADQVE1A16K (before $15 MIR)
==========
$805 + tax and shipping - $35 MIR

The 8800GTS is MUCH better than the 8600GTS... the midrange DX10 cards aren't good for gaming, only watching HD Video.
 
Thanks for the reply, I think I will go with the intel build since I can get everythnig in there I want.

I looked at the Mobo you posted the one I was lookin at was the ABIT IP35 Pro which do you think would be the better solution for gaming?

Also do you think its worth ordering the Q6600 from other then newegg just so I can be sure to get the GO version. I only ask this cause new egg is giving a free game out with their's
 
Yah, Newegg doesn't like guaranteeing such revisions. The main advantage of the G0 stepping is that it runs cooler than the B3. This affects cooling and overclocking. The cooler your chip runs, the longer it will live. The cooler the chip runs at stock, the higher you can push it while overclocking.

The B3 can reach around 3.4Ghz max, while the G0 can reach around 3.6Ghz max. Though, you said you don't plan on OC'ing. FYI, these chips are easy to OC without risking the life of the chip. Both can easily reach 3.0Ghz without much effort at all, and without increasing the cpu voltage. Though, for such an OC, I'd recommend a Tuniq Tower 120 Cooler to replace the stock one, especially with the B3 stepping. If you really want the game, take your chances at newegg, since you don't want to OC much, if at all.

The Abit IP35 Pro is a great board, especially for overclocking. Both boards run the same chipset, so there really is no difference in terms of gaming performance between the two boards. The main selling point, imo, of the IP35 Pro is the uGuru OC'ing software. If you don't need it, the P35-DS3R is a good alternative.
 
Thanks for all the help guys I really appreciate it.
I decided to go with clubit for the processor so I could get the GO version. Who knows I may want to OC in the future. I also went with the EVGA 8800 and the Gigabit mobo. I can't wait to get it here so I can see what it can do.
 
What power supply will you be using with this new system?
 
Hmm only 384W on the +12V rails. Kinda bad for a 600W PSU IMO. And it only has 32 Amps on the +12V rails considering that that the 520W Corsair 520HX has 40A on the +12V rails.

Here's a review of that power supply in question:
http://www.hardwarecanucks.com/hard...-xion-supernova-600w-power-supply-review.html

You may want to look into getting a new PSU.

The label states 456W for +12V1 and +12V2... so its 38A... still not as good as the 520W, but closer than you think, hehe. Though, I agree, not that great for a 600W PSU. It reminds me of the Hiper PSUs.

It uses Fuhjyyu caps, so be sure to keep the system in a cool area.
 
The label states 456W for +12V1 and +12V2... so its 38A... still not as good as the 520W, but closer than you think, hehe. Though, I agree, not that great for a 600W PSU. It reminds me of the Hiper PSUs.

It uses Fuhjyyu caps, so be sure to keep the system in a cool area.

Damn newegg pics. Got the info from the newegg pics of the PSU.
 
Yeah After reading through that I think I'll go a different route for the power supply. Any suggestions on a quality PSU in around 50-60 dollers? I was planning on using that one because I already have it, but I don't wanna if there's a chance it will hurt my system.
On another note those of you that have ordered from Clubit do they take along time to ship or are they pretty good about it? I have Bioshock sitting here taunting me.
 
The B3 can reach around 3.4Ghz max, while the G0 can reach around 3.6Ghz max. Though, you said you don't plan on OC'ing. FYI, these chips are easy to OC without risking the life of the chip. Both can easily reach 3.0Ghz without much effort at all, and without increasing the cpu voltage.

Can you point me to where I could learn about how to do this. I should be getting my G0 stepping chip friday and I like the idea of OCing it just a bit esp if I don't have to increase the voltage.
 
I'm thinking of taking the PSU from my frag box and using that its a Silverstone and its pretty nice and I think its like a 520 watts.
 
silverstone AD0812HB-A70GL

I'm trying to find more information about it, the only PSU by that model # I can find is a Antec but this is a silverstone.
 
Enhance ENP-5150GH 500W PSU - $81 ($41 AR)

If you can deal with rebates, then I recommend the Enhance PSU. If you don't like rebates, then the Goodpower should be good enough for your system.

The rebate won't apply if you only buy the PSU. I saw that earlier in the week or last week, but realized it wasn't a good deal, lol.

silverstone AD0812HB-A70GL

I'm trying to find more information about it, the only PSU by that model # I can find is a Antec but this is a silverstone.

How old is it?
 
I think about 2 years old. It was the one that Falcon nothwest sold with the fragbox2. When I bought the case I picked up the PSU.
 
Just use the Xion for now, and make your next upgrade a PSU upgrade.
 
Back
Top