New PC build, Thoughts?

ZaC851

Limp Gawd
Joined
Feb 17, 2007
Messages
361
Would just like a little input as to the parts being used, and/or if here any better alternatives.

Q6600
eVGA 8800gtx
corsair xms2 4gb DDR2 800
MSI P6N SLI Platinum
XION Supernova 600w PS
Raptor 150gb, 2x 500gb WDD
X-Fi XtremeGamer 7.1

This is also going to be water-cooled(first time doing it). And would like your input, as I am piecing it together

first thing, is there any cheaper, similar alternatives to this?
Koolance RP-1000BK 1kW Series 5


I really like the looks/temp readout of it, and like the compactness of it. Its just, its $250 and its basically a reservoir and pump.....

What about these waterblock and rad?
Thermaltake Aqua TMG1 120mm Radiator
Zalman ZM-WB4 Gold CPU Water Block

Would just like some basic input, will be running this on vista premium/Ultimate. Used mainly for gaming. Not gonna try and push any limits on overclocking, but would like to push it as far as i can, safely with what i have.

also, is nvidia planning on releasing any new cards in the next 3 months? Just want to see if I should purchase the step up program with the 8800gtx.
 
List looks good.
Dont know anything about that MB, I'd look around at what other people use in the 680i class of boards. I have an ASUS P5N32-E SLI and really like it. Remember the 650i boards only carry 8x PCI-e slots in SLI. You might want to look at the ASUS P5N32-E SLI Plus board, it's the 650i but carries 16x PCI-e lanes.
I have 4GB of the Corsair XMS 6400,cant go wrong.
880 GTX is the King,evga is a good brand.
Get a bigger, more well known PSU. I'd recommend the Ultra X3 if you are going to SLI in the future.
If you want to watercool and are a noob to it like me, I'd buy the Nautilus500 rom Corsair. I just put one in my system, so simple I can do it, good temps,150 dollars and you get the whole deal,pump,res,tubing,waterblock,and solution. Got mine from FrozenCPU.
Good luck.
I'm not seeing any new nvidia high end cards in the next three months.
 
I'd recommend you go with EVGA for the motherboard as well. Same reason as the GPU -- great customer support. If you don't need SLI grab a P35 board like the Gigabyte P35C-DS3R.

I'd get a Swiftech block over the Zalman, but the real place you need change is the Thermaltake radiator. They're terribly under-engineered.
 
I wouldn't go with MSI either. They've been nothing but problems for me during the past.
 
Same can be said about biostar and biostar makes great boards these days.
 
Couple of points / suggestions:

1) The chief advantage of 680i boards is SLI support. If you're not going to go SLI, then drop the 680i and look at a P35 board instead -- either the P5K Deluxe, ABit P35, or Gigabyte DQ6 for highend, or a Gigabyte DS3R as a midrange option if you don't need two PCI-E X16 slots. SLI is only worth it these days if a) you're gaming at a resolution of 1920x1200 or higher and b) you're willing to drop some cash on two 8800 GTX boards. Anything else isn't worth the complexity of the setup and heat output generated.

2) With four gigs of RAM, be sure to run a 64-bit version of Windows in order to use it all.

3) If you decide to go 680i, get the EVGA NF68-A1 model. EVGA has the best support and service in the 680i world, and they're by far the most popular board, ensuring a good support and OC community should you need it. Furthermore, EVGA has recently released a BIOS update for Penryn support. No other 680i board has this yet, IFAIK.

4) This is my own personal opinon, but if you're not going to stress the OC aspect of your rig, then don't waste money on a complex water system. A high-end air cooler for around $50, such as the Tuniq Tower or Thermalright Ultra 120, can very well for a fifth of the price. Of course, if your goal is to run a powerful system very quietly, water is usually the way to go.

Good luck,

Mark.
 
so, this mobo wont support the penryn as of now? Is the penryn still gonna be socket 775, so they can maybe release a bios update for this board also? I dont plan on upgrading the cpu for some time so, hopefully they will.

I dont plan on going sli, but i still heard alot of good reviews for this board, so that was my main reason in getting it. I could possibly go sli in the future though, depending on how prices go on the 8800gtx.

And Vista 32 wont recognize the full 4gb?

also, im not gonna be pushing for any new records with the water-cooling setup. Maybe 3.5-3.6ghz. Later on, ill get a northbridge and gpu block and put them in the loop, or in there own loop. Just waaayyyy over budget now.... I wanted to spend $1500 max, im at $2500 now....

and yes, The computer is in my living room area, so it needs to be silent.
 
If you want 680i, then you should strongly consider the EVGA NF68-A1. It's a better product--hand's down. It has the same features as the MSI board, but it has better service, support, and warranty. And besides, why take your chances on whether or not MSI's board will support Penryn chips when you know that EVGA's will. (Penryn is LGA-775 btw.... A BIOS update is needed and is left to the vender to implement and support.) Furthermore, with the exception of the Striker Extreme, all 680i boards are based off the same reference design--so you're basically getting the same hardware no matter the vendor.

However, looking over your original post, I see you specified the P6N Platinum, which in retrospect is a 650i board. (argh to vendor naming schemes... diamond / platinum / ???) If you're looking for a mid-range board, then my suggestion is to forget about SLI and get the P35-based Gigabyte DS3R... no questions asked. It's newer, simpler to work with, and will likely support a higher FSB OC.

Remember that SLI is worth it only if you're gaming at a very high resolution (1920x1200 or better.) Even if GTX 8800s fall in price as new cards come out, that second card won't make much of a difference if you don't game at a high resolution.
...

No, Vista 32 won't recognize all 4 gigs. You'll need the 64 bit edition.

If you want a silent Q6600 running at 3.6 then water is definitely the way to go. I don't have much experience with water setups, but I'm sure someone on [H] can give you great advise.

Good luck,

Mark.
 
I agree with Mark on pretty much everything he said, lol. SLI is a bad upgrade path unless you plan on getting a large LCD monitor. Q6600 @ 3.6Ghz eh? wow... good luck! let us know how that goes!
 
Not to offend, but you need to learn a hell of a lot more about watercooling before you start making statements like "I'm going to get my Q6600 to 3.6Ghz silent on water". Stop worrying about building the machine, go over to the watercooling forums, read up, start a thread asking for help, and in a couple of weeks when you have a better idea of what you're actually asking, revisit this thread.
 
Not to offend, but you need to learn a hell of a lot more about watercooling before you start making statements like "I'm going to get my Q6600 to 3.6Ghz silent on water". Stop worrying about building the machine, go over to the watercooling forums, read up, start a thread asking for help, and in a couple of weeks when you have a better idea of what you're actually asking, revisit this thread.

dont put words in my mouth, I clearly stated this is my first time using water, and i wasnt trying to push for any records here. Im going to try as much as I can, safely on what I got. This is not my first time building a computer, Just first on watercooling.
 
As mentioned before, you need to decide if you're going down the SLI road. If so, then get the EVGA 680i NF68-A1.

If not, then you need to decide if you need/want/or will use the features of a $200+ motherboard like the Asus P5K Deluxe. If you can justify the price over features, then by all means get the P5K Deluxe. For a non SLI system, it's a better choice.

However, if you aren't going to use most of the extras on the P5K Deluxe, then go for a Gigabyte DS3R for considerably less money. Both the P5K and Gigabyte are P35 motherboards, and both are better choices than 680i or 650i if you're not going SLI.

Mark.
 
Back
Top