- Joined
- Feb 16, 2003
- Messages
- 9,544
Alright, so I've been in the process to upgrading to an i7 system, and it's proven to be a very tedious process.
First, here's the setup.
i7 920
3x2GB OCZ DDR3 1600 Reaper HPR 7-7-7-24 ram
HD6850
Crucial SATAIII 128GB SSD
Seasonic 620w Modular 80 bronze PSU
X-Fi Platinum
Corsair H50
Herein lies the problems:
(first motherboard) Gigabyte GA-X58-UD3R rev. 2.0
This is an Open Box item from Newegg that would power on, not boot cycle, but would never reach the Bios screen. No beeps, no warnings, nothing.
Tried reseating CPU, memory in the proper slots (per manual, as well as online, also including 1-2 sticks of ram), checked and rechecked all connections.
2nd motherboard: MSI X58 Pro-E
Took multiple tries to get this to post, after it posted, forget trying to move it without having issues. Finallly after getting it to post and in a spot I can deal with, I install Windows 7 Pro 64bit on a horrible resolution 8bit looking screen, and after the reboot, I get "signal out of range" displayed on my screen. After that it just sits there. I of course have rebooted, shut down, reset, let sit for minutes to type this and get no further.
What am I doing wrong? or am I not insane?
This is a picture that shows what the Windows install screen looks like.
First, here's the setup.
i7 920
3x2GB OCZ DDR3 1600 Reaper HPR 7-7-7-24 ram
HD6850
Crucial SATAIII 128GB SSD
Seasonic 620w Modular 80 bronze PSU
X-Fi Platinum
Corsair H50
Herein lies the problems:
(first motherboard) Gigabyte GA-X58-UD3R rev. 2.0
This is an Open Box item from Newegg that would power on, not boot cycle, but would never reach the Bios screen. No beeps, no warnings, nothing.
Tried reseating CPU, memory in the proper slots (per manual, as well as online, also including 1-2 sticks of ram), checked and rechecked all connections.
2nd motherboard: MSI X58 Pro-E
Took multiple tries to get this to post, after it posted, forget trying to move it without having issues. Finallly after getting it to post and in a spot I can deal with, I install Windows 7 Pro 64bit on a horrible resolution 8bit looking screen, and after the reboot, I get "signal out of range" displayed on my screen. After that it just sits there. I of course have rebooted, shut down, reset, let sit for minutes to type this and get no further.
What am I doing wrong? or am I not insane?
This is a picture that shows what the Windows install screen looks like.
Last edited: