New Gaming rig

piXel

Gawd
Joined
Jul 17, 2007
Messages
535
I'm building a PC for my bro in the next week or so, i suppose over clocking will be a bit of an aim aswell so im wondering if the hardware chosen is up to the task, i chose the 1950 XT as a place holder for a DX 10 card a little later down the line.

I havn't looked into the lastest hardware fads in some time so im not sure, as usual im not sure about the motherboard so if you have any other suggestions around the 140 price range it would be appreciated.

I want to bring the processor to around 2.8 ghz im guessing i can just increasing the FSB a little?

Anyway here is the list:

Seagate Barracuda 7200.10 320GB ST3320620AS SATA-II 16MB Cache - OEM: £52.86
Pioneer DVR-112DBK 18x18 DVD±RW Dual Layer ReWriter - (Black) OEM £19.96
Antec Nine Hundred Ultimate Gaming Case £64.61
Corsair 2GB DDR2 XMS2-6400C5 TwinX (2x1GB) £66.96
Intel Core 2 Duo E6600 "LGA775 Conroe" 2.40GHz (1066FSB) - Retail £150.39
Asus Commando Intel 965 (Socket 775) PCI-Express DDR2 Motherboard £140.88
OCZ StealthXStream 600w Silent SLI Ready ATX2 Power Supply £58.74
Sapphire 1950 XT Retail £115
total=£660.01 including VAT
 
Seems decent enough. If you plan on OCing your gonna need an aftermarket CPU cooler as well. Though getting it to 2.8Ghz should be easy with the stock cooler.

Also you might want to go with a better power supply if you want some additional "future-proofing" especially for some dx10 cards.
 
You can probably do a good bit better than that ASUS board, and that PSU as well. Look for a P35 based motherboard. Gigabyte and Abit tend to run a little less than ASUS. Everything else looks solid enough.

PC Power and Cooling, Seasonic, Silverstone, Corsair, Etasis, Enermax... all are good options, PSU-wise. A good 500+ watt unit will be fine so long as you're staying with a single card setup.
 
Perhaps wait a few days and get a 6x50 CPU instead of the E6600. Of course judging by the £ I'm assuming you're from the UK so I don't know how the availability will be there.
 
Well if you only want a 2.8ghz CPU then get the e4300 for £74
and get the X-Clio GoodPower 500w for around £45
 
Well, now that the price reductions have been announced, of course buy a Q6600. The Antec Nine Hundred is known to be a bit of a pain, and is often quite hard to build in, but the cooling properties, for you, might make it a good deal. the PSU, and Ultra, or the Xclio, or Hiper will all be good for you. I would personally go for the Ultra, because it is fully modular, but us Brits can never find them. The Hiper is also very good, so you could get one of those. But, the Xclios slightly cheaper, and will do you fine. A P35 board like the Abit IP35 or Asus P5K would be the best option, with lots of new features. If you want 2.8ghz, a 4300 or even the uber cheap E2140 will be fine. The 2140 is not actually much slower than the bigger brothers, hardly noticable, even with the smaller cache.
 
The Q6600 will be around £200, kinda outside his budget and don't forget you should get a aftermarket heatsink @ £35+.

Oh and I did say £200 not $200.
 
Q6600 is this a quad core version :S, will it even cost 150 though?

Yeah if you can suggest a better case then please do and links to products would be cool aswell :)
 
When it says on the prcoessor details (1066FSB)

Does this meen the ram will have to run at 1066 mhz aswell?
 
OK, I guess, just that I would personally stretch my budget further to get the quad.

You have to remember, the FSB is quad pumped, so you divide the FSB speed by 4 to get the required DDR memory speed. So, FSB of 1066 / 4 x 2 (because of DDR2, not DDR'1') which would mean 533 mhz memory.
 
OK, I guess, just that I would personally stretch my budget further to get the quad.

You have to remember, the FSB is quad pumped, so you divide the FSB speed by 4 to get the required DDR memory speed. So, FSB of 1066 / 4 x 2 (because of DDR2, not DDR'1') which would mean 533 mhz memory.

Spot on. ;)
 
OK, I guess, just that I would personally stretch my budget further to get the quad.

You have to remember, the FSB is quad pumped, so you divide the FSB speed by 4 to get the required DDR memory speed. So, FSB of 1066 / 4 x 2 (because of DDR2, not DDR'1') which would mean 533 mhz memory.

All true, but you should probably still get DDR2-800 as it will allow more OC headroom, and you can always try for tighter timings at lower speeds. You'd only be saving around $15 going with DDR2-667.
 
No. You still divide by 4 with most of Intel's CPUs.
 
Back
Top