New Gaming Rig -- Need Suggestions!

bass_ec

Gawd
Joined
Jun 25, 2006
Messages
884
COOLER MASTER Centurion 5 CAC-T05-UW Black Aluminum Bezel, SECC ATX Mid Tower Computer Case - Retail
$49.99

EVGA 640-P2-N821-AR GeForce 8800GTS 640MB GDDR3 PCI Express x16 HDCP Video Card - Retail
$389.99

Crucial Ballistix 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 1000 (PC2 8000) Dual Channel Kit Desktop Memory Model BL2KIT12864AL1005 - Retail
$236.99

Open Box: ASUS P5N-E SLI LGA 775 NVIDIA nForce 650i SLI ATX Intel Motherboard - OEM
$87.99

Intel Core 2 Duo E4300 Allendale 1.8GHz LGA 775 Processor Model BX80557E4300 - Retail
$114.50
Subtotal: $879.46

EDIT: Forgot my soundcard...not that it matters.

Creative 70SB046A00000 7.1 Channels PCI Interface Sound Blaster X-Fi XtremeGamer Fatal1ty Professional Series - Retail
$99.99 AR

Don't worry about the prices. I just want to know if it's a decent rig, if everything is compatible, etc. I got the Crucial Ballistix for like $109 AR, so that price listed is null and void. My budget is about $800-1000 though, so keep that in mind. I don't need an OS or a monitor.

Ok here's my questions.

1) I got that Free AR Ultra 600w PSU from Frys yesterday. That should be fine, right?
2) I have no clue where to start with cases. Any suggestions on a good entry level case that everyone looks to if they just need plenty of circulation and a sturdy case? Any "really solid" performers in this category? I just don't want a flashy gaming case, that's my main thing.
3) Is that motherboard ok? Is OEM a good idea for the most important piece of a computer.
4) Any other suggestions on GPU? I don't have enough for a 8800 GTX, but I could spare a 640mb GTS. Is it worth it, or should I consider the 320mb to save some money? Is the price/performance ratio big enough to be worth it?

Any other suggestions, please let me know!!!

Thanks guys!
 
after reading up a bit, it seems that a lot of people like the 320mb version of the 8800 GTS over the 640 version, simply because the price/performance ratio is very low. If I'll be running at 1900x1200, is that still the case?
 
If you're running at 1680x1050 or higher there will be a large difference in performance the more you increase the resolution. 320MB of RAM isn't enough for high resolutions. You can also find that RAM you're looking at for less than half that price if you will look in the hot deals section. Don't pay over $150 for a 2x1GB kit of memory. I would suggest a better motherboard if you're planning to overclock that E4300 very high. Go with an DFI P965-S or Asus P5B Deluxe. Get a more expensive case that's better than that one. If you're not looking to spend a lot on the case then look at the smaller Lian-Li cases such as the A05.
 
If you're running at 1680x1050 or higher there will be a large difference in performance the more you increase the resolution. 320MB of RAM isn't enough for high resolutions.

Ok, thanks. I'm still trying to determine what I'm going to be using. I was looking at this page: http://www.anandtech.com/video/showdoc.aspx?i=2926&p=1 and it seemed like the 320 could hold up with certain games. Though it might be another month before I actually build the system, so I'll keep my eyes out on a good deal for the 640 version. But a $150 price difference for 5-15 more FPS is kind of a waste.

You can also find that RAM you're looking at for less than half that price if you will look in the hot deals section. Don't pay over $150 for a 2x1GB kit of memory.

Yeah, like I said, I picked up Crucial Ballistix for $109 AR. I was just putting it into the post via Newegg just to show you what I bought. But I did get it for $109 AR from Mwave.com.

I would suggest a better motherboard if you're planning to overclock that E4300 very high. Go with an DFI P965-S or Asus P5B Deluxe.
.

Ok, I'll look into those. Any specific reasons why not that one though?


Get a more expensive case that's better than that one. If you're not looking to spend a lot on the case then look at the smaller Lian-Li cases such as the A05.

Will do.


Thanks for the help! Would love other's opinions as well!
 
Looks good. The X-Finity should do just fine with that setup.
 
New Gaming Rig -- NEED SUGGESTIONS!!!

Please don't SHOUT in thread titles.
 
Also, another question I have. What do I need to worry about in regards to voltage and whatnot? What are common mistakes that first time "do it yourself" computer builders commonly run into in regards to voltage? I just learned about RAM and it's voltage needs (the mobo I have supports up to 2.5 I hear, while the Ballistix only needs 2.2v) so what else should I look out for?

Thanks!
 
The centurion 5 is a good budget case. If you want a more quiet solution, the 534 uses a 120mm intake fan instead of the 80mm fan used by the 5 (120mm is more quiet). So, if you don't want to spend too much on a case, you chose a great one. The Lian-Li PC-7 is also nice, but more expensive. Cases are personal, so its up to you. Any of the cases I mentioned or mentioned earlier in the post have good airflow.

The P5N-E is fine for overclocking. Since you chose an E4300, you don't need a high FSB reaching mobo, even though the P5N-E can reach near 500Mhz. I think the avg limit on allendales is around 3.4Ghz with good air cooling, and an optimal OC would be 8*400=3.2Ghz, since that ram you got can do 4-4-4-12 @ DDR2-800 2.2v, and you could lower the multiplier on the E4300. Don't forget to pickup a Scythe Ninja Plus Rev.B ($40 at the egg) or AC Freezer 7 Pro (dont pay more than $25 for it).
 
Yes it is a good case. Anyway, go with previous suggestions and you should be set.
 
Thanks.

My biggest question now is in regards to voltage. What do I need to look for as far as voltage goes. I've heard a friend talk about GPU voltage, RAM voltage, and CPU voltage. How do I look for all these things, and do they all have to match, or what? I'm really clueless in this area.
 
Thanks.

My biggest question now is in regards to voltage. What do I need to look for as far as voltage goes. I've heard a friend talk about GPU voltage, RAM voltage, and CPU voltage. How do I look for all these things, and do they all have to match, or what? I'm really clueless in this area.

Voltages are controlled by the board subsystem and BIOS.

If you're not overclocking... Don't worry about them. It will all work together, it HAS to work together to conform to international specifications.
 
dont get a sb x-fi if ur going to use vista. Still horroid drivers for vista.

I wish i did not bought the sound card when I made my new computer when vista was out.


I can't even use microphone for input in the x-fi card on vista still.

So many problems and yet my motherboard internal sound works fine and stuff when plug in gets detected fine.


Creative really isn't that good they are just a molopoly somehow
 
The only voltage you should have to worry about when choosing parts is the ram voltage. Make sure the ram you get is rated for 1.8v, which is the standard DDR2 voltage. However, a lot of sticks need higher voltage, so you can check reviews to see if the board you chose supports the voltage your ram needs (or just ask here). JEDEC specs state DDR2 voltage to be 1.8v, and this is what Intel chipsets officially support... but we all know the good board manufacturers give us some good options to push that voltage higher.

According to a review found through google, your board supoprts vDIMM: 8-step DRAM voltage control - adjust DRAM voltage max. 0.6V. 1.8+0.6=2.4v. The ram you got lucky with needs 2.2v, so it looks like you're good to go. :D
 
hey hit me up on aim, i can help you with your suggestions if you want, i will send you a pm with my aim sn.
 
The Sonata II is a pretty decent case. While the included PSU is decent (Currently powering my bro's PC), there were a bad batch of Antec Truepower II power supplies that fucked up people's systems. So like enginurd has said, ditch the included PSU for your system.
 
Yeah, I plan to use that FAR Ultra 600w PSU that I got from Frys.

I'm getting excited!!! :)
 
I'm not sure what to think...I don't really know what that's telling me. I mean, I'm going to have an optical drive, a HDD, a sound card and my GPU drawing power from it, so the crossload issue doesn't seem to be a problem, unless I'm misinterpreting?
 
I'm not sure what to think...I don't really know what that's telling me. I mean, I'm going to have an optical drive, a HDD, a sound card and my GPU drawing power from it, so the crossload issue doesn't seem to be a problem, unless I'm misinterpreting?

This PSU definitely offers a lot of power, ironically it seems to only be willing to offer it up if evenly loaded. Due to it's crossload "issue" I wouldn't suggest video cards as high as x1900's unless the 3.3V and 5V rails are satisfied with hard drives, PCI cards and/or some USB devices. That's right: Feed the power supply with more stuff to power and the power supply will actually perform better.

Otherwise, you're only going to see the performance of a typical 450W PSU. So if you only plan on having one hard drive and an optical, you might want to keep your video card choices limited to a pair of Nvidia 6x cards or ATI x1800 cards.

You need more stuff, I guess, lol.
 
Basically you're gonna need to have the following to avoid the crossload issue:

2 x hard drives, maybe a 3rd for safe measure
Sound card
Optical Drive, maybe a 2nd for safe measure
Media Card Reader
 
Back
Top