• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

New "D"

S

SazanEyes

[H]ard|DCer of the Month - January 2011
Joined
Jan 14, 2009
Messages
1,250
I picked up the L5640 combo from FLECOM's sale, so I now have six hex-cores all folding bigadv.



I overclocked to 3.65GHz (203x18) just to get it up and running -- the specified maximum of the DDR3 1066 ECC RAM :eek: . However, during LinX testing it was faster at 180 BCLK, so I'll do some further tweaking later. I'm seeing a 26 minute TPF on a P2686, which is good for 46K PPD.

Anyway, I should now have a total PPD over 300K, barring the occasional P2684. Hopefully that's enough to challenge Tigerbiten (in daily PPD, not total points).
 
SazanEyes said:
I picked up the L5640 combo from FLECOM's sale, so I now have six hex-cores all folding bigadv.



I overclocked to 3.65GHz (203x18) just to get it up and running -- the specified maximum of the DDR3 1066 ECC RAM :eek: . However, during LinX testing it was faster at 180 BCLK, so I'll do some further tweaking later. I'm seeing a 26 minute TPF on a P2686, which is good for 46K PPD.

Anyway, I should now have a total PPD over 300K, barring the occasional P2684. Hopefully that's enough to challenge Tigerbiten (in daily PPD, not total points).
Click to expand...
.

Awesome sauce, i believe that entitles you to join the Hex-Hex club:D
 
SazanEyes said:
However, during LinX testing it was faster at 180 BCLK, so I'll do some further tweaking later.
Click to expand...

I did some minor tweaking (BLCK from 203 to 204, RAM from 8-8-8-23 to 8-8-8-22) and got an 18% improvement on LinX times, so I'm no longer worried by that fast time at 180 BCLK. However, F@H TPF did not change at all. LinX seems very sensitive to minor memory changes, which I've seen on my SR-2 as well. It looks like I should just push for maximum BCLK, but the RAM is a limitation, so I think I'll stay where I am for a while.
 
You must log in or register to reply here.
Back
Top