• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

New computer does not work

G

Gusty987

Weaksauce
Joined
Jun 25, 2004
Messages
105
My new build will not output a signal to the monitor. Also, I do not get any beeps no matter what I do. It is composed of the following parts:

ECS nForce 570 SLIT-A motherboard
Intel C2D E4300
1gb Kingston DDR2
GeForce 6200LE
Rosewill 350w PSU (23w on +12v)

Below are the things I have tried:

-Exchanged motherboard
-Exchanged CPU
-Tried a different video card (X300se)
-Tried a different PSU (Antec 380w)
-Tried RAM stick in all slots
-Tried with motherboard outside of case on mobo box with just CPU, mem, and vid card installed
-Removed CPU to listen for beeps...no beeps. Removed RAM to listen for beeps....no beeps.

What else can I try.
 
it does turn on right? Just with no sound and no video?
 
Have you tried swapping out to some other RAM?
Made sure the CMOS Clear jumper is seated correctly?
Tossed an old PCI card in to ensure your PCI-E / AGP slot is good?

Also - stupid question - are you sure the monitor works correctly?
 
all the power connectors pluged in? 24pin and 4 pin to the mobo. also got the power button wired up right, maybe start the puter by manually touching a small screw to the 2 power pins on the mobo to short it and start it.
 
You must log in or register to reply here.
Back
Top