New computer does not power on

aye29

Weaksauce
Joined
Jun 20, 2006
Messages
76
A guy in my lab bought components for a new Core 2 Duo computer but when I put it together it doesn't power on and I'm not sure if the motherboard might be bad. When I press the power button, the LEDs on the motherboard come on and the fans spin for about half a second and then shut down; if I press the power button again nothing happens, I have to turn the power switch on the PSU itself off and on to get the power button the the case to do work again. I thought the PSU might not have enough power but if I remove the video cards and try turning it on, the same thing happens. I tried jumpstarting the PSU by shorting the green wire so I know the PSU works fine. Finally if I turn on the power supply but leave the computer off, I cant see any LEDs on the motherboard so either there is no standby LED or the standby LED is not getting power.

The components are:
Intel E6700
Evga 650i motherboard (http://www.newegg.com/Product/Product.aspx?Item=N82E16813188017)
4x1Gb Patriot DDR2
AMD 2900XT
500W Coolermaster PSU (I know its way to small for a 2900XT, I didn't buy them)
 
try it with just one stick of ram and make sure you have the aux 12V power connector plugged into the motherboard and the extra power connector for the video card is plugged in, sorry had to mention them to make sure, I am thinking the ram. Lot of boards dont like 4 x 1GB and you might have to boot with one stick until you can get into the bios and up the dram Vdimm voltage a bit, check the specs on those exact sticks, 1.8V is the default, a lot of fancy ram needs a bit more.
 
As BillP mentioned, you might to want to check if you properly plugged in the "4-pin CPU power connector"

It is the one on the lower left of this picture:
Link
 
Back
Top