New Computer Critique

B737Capt

n00b
Joined
Jul 29, 2005
Messages
57
I need some critique on my new computer build:

  • Intel E6700 C2D
  • ASUS P5B Deluxe
  • G.SKILL 4GB (4x 1GB) DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400PHU2-2GBHZ - Retail
  • 2x Seagate Barracuda 7200.10 ST3500630AS 500GB 7200 RPM SATA 3.0Gb/s Hard Drive - OEM (Raid 1 Config - need backups of all my files)
  • EVGA 768-P2-N835-AR GeForce 8800GTX 768MB GDDR3 PCI Express x16 SUPERCLOCKED HDCP Video Card - Retail
  • SAMSUNG 18X DVD±R DVD Burner With 12X DVD-RAM Write, LightScribe Technology Black SATA Model SH-S183L - OEM
  • SILVERSTONE TJ09-B Black Aluminum ATX Mid Tower Computer Case - Retail
  • SILVERSTONE ST75F ATX12V / EPS12V 750W Power Supply - Retail
  • Microsoft Windows Vista 64-Bit Ultimate for System Builders Single Pack DVD - OEM
I use my computer equally for gaming, web design, graphics design, video editing and encoding, audio editing and encoding, etc...

I appreciate any input or suggestions!
 
I need some critique on my new computer build:

  • Intel E6700 C2D
  • ASUS P5B Deluxe
  • G.SKILL 4GB (4x 1GB) DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400PHU2-2GBHZ - Retail
  • 2x Seagate Barracuda 7200.10 ST3500630AS 500GB 7200 RPM SATA 3.0Gb/s Hard Drive - OEM (Raid 1 Config - need backups of all my files)
  • EVGA 768-P2-N835-AR GeForce 8800GTX 768MB GDDR3 PCI Express x16 SUPERCLOCKED HDCP Video Card - Retail
  • SAMSUNG 18X DVD±R DVD Burner With 12X DVD-RAM Write, LightScribe Technology Black SATA Model SH-S183L - OEM
  • SILVERSTONE TJ09-B Black Aluminum ATX Mid Tower Computer Case - Retail
  • SILVERSTONE ST75F ATX12V / EPS12V 750W Power Supply - Retail
  • Microsoft Windows Vista 64-Bit Ultimate for System Builders Single Pack DVD - OEM
I use my computer equally for gaming, web design, graphics design, video editing and encoding, audio editing and encoding, etc...

I appreciate any input or suggestions!

Couple thoughts:
if you're planning on doing an overclock, you might want to pick up a good CPU cooler; if the overclock is mild, you can probably drop down to 6600.

RAID 1 isn't back-up. Consider adding an external USB drive that you hook up only when you're putting files on it so an electrical incident doesn't zap drives. Consider some off-site back-up: either rotating data offsite (e.g. data to safety deposit box or other secure location offsite) or using one of the online solutions.
 
I need some critique on my new computer build:

  • Intel E6700 C2D
  • ASUS P5B Deluxe
  • G.SKILL 4GB (4x 1GB) DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400PHU2-2GBHZ - Retail
  • 2x Seagate Barracuda 7200.10 ST3500630AS 500GB 7200 RPM SATA 3.0Gb/s Hard Drive - OEM (Raid 1 Config - need backups of all my files)
  • EVGA 768-P2-N835-AR GeForce 8800GTX 768MB GDDR3 PCI Express x16 SUPERCLOCKED HDCP Video Card - Retail
  • SAMSUNG 18X DVD±R DVD Burner With 12X DVD-RAM Write, LightScribe Technology Black SATA Model SH-S183L - OEM
  • SILVERSTONE TJ09-B Black Aluminum ATX Mid Tower Computer Case - Retail
  • SILVERSTONE ST75F ATX12V / EPS12V 750W Power Supply - Retail
  • Microsoft Windows Vista 64-Bit Ultimate for System Builders Single Pack DVD - OEM
I use my computer equally for gaming, web design, graphics design, video editing and encoding, audio editing and encoding, etc...

I appreciate any input or suggestions!
Youre looking for general hardware :) this is for system builder and gadget discussion :)

That said, id go with 32bit vista over 64 for compatibility.

id change the ram to something like the buffalo firestix that are guaranteed D9 (or flex XLC cause i really want to watercool lmao )

i dont like the TJ09, but the case is a personal thing... although i would recommend a Lian Li PC v1000, 1200, or 2000 :p

not sure on the motherboard... id probably go with 680i myself...

Aftermarket cooling at all?
 
Couple thoughts:
if you're planning on doing an overclock, you might want to pick up a good CPU cooler; if the overclock is mild, you can probably drop down to 6600.

RAID 1 isn't back-up. Consider adding an external USB drive that you hook up only when you're putting files on it so an electrical incident doesn't zap drives. Consider some off-site back-up: either rotating data offsite (e.g. data to safety deposit box or other secure location offsite) or using one of the online solutions.
I use this computer to run my business in addition to all the other stuff. I currently use RAID 1 Mirror so that if one of my hard drives crash I'm not completely out of service. I do have a WD 320Gig USB backup drive that I failed to mention.

I need suggestions for a good CPU cooler. I want one thats very quiet but effective as I do plan on doing some overclocking. I also need one thats fairly easy to install as I do not have time or desire to break out all the tools and make this a large and difficult project.

Youre looking for general hardware :) this is for system builder and gadget discussion :)

That said, id go with 32bit vista over 64 for compatibility.

id change the ram to something like the buffalo firestix that are guaranteed D9 (or flex XLC cause i really want to watercool lmao )

i dont like the TJ09, but the case is a personal thing... although i would recommend a Lian Li PC v1000, 1200, or 2000 :p

not sure on the motherboard... id probably go with 680i myself...

Aftermarket cooling at all?
Sorry did I post in the wrong forum?

Thought about using Vista 64 because it can use 4 Gigs of RAM. As I understand Vista 32 is limited to 3 Gigs. Thought that 4x 1 gig sticks would run better 3x sticks. I also understand that Vista is a memorey hog.

The G.Skill's are reported to be D9 and get very good reviews on Newegg. Also they are on sale for $229 plus an additional $30 off the system. Reviews seem kind of mixed on the Firestix. Price seems good but heard these are actually DDR 667?

Not crazy about the design of the Lian-Li's. Doesn't seem to have a lot of room for custom cooling solutions.

680i motherboards seem to still have a lot of issues with drivers. Am I wrong? I want a good stable MB with a strong working features.

Thank you for your input guys! Keep it coming! :)
 
Good cooler: Arctic Cooling Freezer 7 Pro, easy to install and will keep an OC'd 6700 at a nice 40 C:D

I have an ASUS P5N32-E SLI (680i) board and an e6700. The board has been a rock since I built the system over 3 months ago. I use it [H]ard and it hasnt even broken a sweat. No driver or software issues what-so-ever.
 
I use this computer to run my business in addition to all the other stuff. I currently use RAID 1 Mirror so that if one of my hard drives crash I'm not completely out of service. I do have a WD 320Gig USB backup drive that I failed to mention.

Yes, I figured you probably did but some folks are treating RAID 1 as backup. I lost $$$ when my wife's disc went feet up and she lost some baby pictures when her machine was outside my usual (lame) backup procedures. That was an expensive recovery.
 
I also recommend the Arctic Cooler Freezer 7 Pro. It's pretty quiet and allows for a decent overclock.

And since you're going with 64bit Vista, make sure that programs you use for your business will work in 64bit Vista. Hell make sure they work in 32bit Vista!
 
Yah, the HZ G.skill sticks use micron chips. Though, no need for such overclockable ram with that CPU.

Since you plan on OC'ing, the E6600 is a better value than the E6700. There is nothing about the E6700 that warrants its price premium over the E6600.

The AC F7Pro is good, but hard to find. The Scythe Ninja is very quiet, and also very effective. Other favorites are the Tuniq Tower, Zalman 9X00, Ultra 120, etc.

Since you're buying all new hardware, you shouldn't have any driver issues with 64-bit Vista unless you have an old printer or some other old peripheral.

Another motherboard you should consider is the P5N32-E SLI PLUS... check out the reviews. Its a great board without all the problems of the 680i chipset, but still has dual 16x pci-e in case you ever need to go SLI. Though, if you never plan on upgrading to a larger monitor, then theres no need for SLI, hehe.
 
Back
Top