New C2D Build

markt435

Supreme [H]ardness
Joined
Aug 9, 2004
Messages
7,590
So I just sold my laptop and bought these parts. Gonna be overclocked a little bit...then more when I get a decent HSF. Here is the specs though...

Core 2 Duo E6300 1.86 (Conroe)
Kingston HyperX 1GB (1x1GB) DDR2 800 (plan to add another dimm when I get more money)
XFX Geforce 7900GT 256MB
ECS P965T-A ATX Mobo
Seagate Barracuda 160GB 7200RPM SATA3
Xclio Goodpower 500W PSU
Antec Sonata Case
Sony DVD Drive
Lite-On 18x DVD Burner Drive
Foxconn 802.11b/g PCI Card

Dunno bout the display though...I'll be borrowing a shit monitor from a friend til I get money to pay for one...should be soon. But all in all...I think it was a good build for the price. I had the case and DVD drive already. In total it cost $861.

System is mostly gonna be used for my graphics business and games in my downtime of course. Comments anyone? lol
 
I would stay away from ECS if possible...

high failure rate...low quality components..

don't bet on it..
 
Really decent specs but that ECS mobo makes me cringe. Quick question: why did you buy a Sony DVD drive when you already bought a Lite-On DVD burner?
 
everyones talking about the ECS board, im just another on the pile.

I wouldnt say they're low quality, I would say there not enthusiast. At stock settings there completly average. 5/10. Average failure rate. Average performance. Average everything.

But the Bios they use is like, american standard, and has NO oc options. and the Failure rate of an OCed ECS board, well.. not good.

My vote: ditch the ECS, go [H]ard core. Its time for DS3, DS4, or 680i.

Edit2: turns out the E6300 is a Conroe, so is the E6400.
 
really...hmmm. well i'll prolly return it if it ends up bein that shitty. and the e6300 is an allendale? why would they list it as a conroe?

as for being an enthusiast...i can't say i am anymore. i used to be, then i went to getting laptops. this is my first desktop build in a long time so i dunno...suppose i've been out of the loop lately. but yeah, if its that bad, i'll return it. it was the cheapest...considering what it had and then a MIR with it. but i suppose you get what you pay for huh?
 
Danny Bui said:
Really decent specs but that ECS mobo makes me cringe. Quick question: why did you buy a Sony DVD drive when you already bought a Lite-On DVD burner?
i didn't buy the sony...i've had it sitting around from a prev build from a long time ago....and if i'm copying something i find it a lot easier to copy disc to disc than copy disc, take it out, put in blank disc. but thats just me.

and i took a look around and found some reviews for the mobo...its supposedly a stable board judging from all the reviews. its just lacking in overclocking. thats fine. i'll do a little bit, but i'm not gonna sit there and tweak it to the max it can go. the main thing i am worried about is the PSU...i didn't see the mobo required the 8 pin ATX12v connector as well. From lookin at the pics on newegg of the PSU, it doesn't seem to have that connector....is there a way to adapt to it or do I have to return that one and get a new one with the connector?

EDIT: Mobo has the 24 pin connector, Additional 4 pin molex, plus this 8 pin I've never seen before...any ideas?
 
i might be wrong but pretty sure.. that...

Conroe= E6600 and above..ones with cache not disabled

Allendale= E6300-E6400..ones with half cache disabled
 
Ah...but I read its conroe based...just less cache. meh. Any ideas for this PSU issue I might have?

EDIT: Nevermind...found a converter cable.
 
the E6300 and E6400 are infact conroes. They just sorta, dis obey the rules. Toledo and manchester are the ones i keep bringing up. but Windor's 2MB counterpart is also named Windsor. So, Sometimes they name the chip w/ half the L2 (even if its just disabled) a new core name, sometimes they dont.

In this case, they stuck with the name conroe.

For futher info, go here

but back on topic. If you are looking for some hard core overclocks, and your getting a sweet deal on that machine, You can just swap out the motherboard. You can probibly sell that board to a small time computer shop, or e-bay it to recover some of the money. But ultimatly expect the majority of the cost to come from your pocket.

I have 3.56GHz stable on my 680I board w/ an E6300.
 
I actually might return it for a Biostar...I noticed it in another thread and it was only like $10 more. I looked at ECS's website and it had a new BIOS that supported tweaking the mem voltage so hopefully it'll work with the mem I got. I've been reading the reviews of the board on newegg and it seems like a lot of ppl have problems with RAM as the board seems to be very picky. But otherwise, most of the reviews seem to say its very stable. Thats mostly what I'm lookin for. I read some actual published reviews that got the e6300 up to 2.33ghz easily and it was stable.

As far as the price...I think i did get a great deal on everything even if I do count the mobo. Considering I had the case from a previous build I just wanted to up the PSU a little. And its also SLi compatable. So that would be a true statement about the mobo. I could swap it out, add another 7900GT and be good to go without spendin a ton of money. Overall I'm happy with the purchase but we're still gonna have to see with the mobo.

MrWizard6600 said:
the E6300 and E6400 are infact conroes. They just sorta, dis obey the rules. Toledo and manchester are the ones i keep bringing up. but Windor's 2MB counterpart is also named Windsor. So, Sometimes they name the chip w/ half the L2 (even if its just disabled) a new core name, sometimes they dont.

In this case, they stuck with the name conroe.

For futher info, go here

but back on topic. If you are looking for some hard core overclocks, and your getting a sweet deal on that machine, You can just swap out the motherboard. You can probibly sell that board to a small time computer shop, or e-bay it to recover some of the money. But ultimatly expect the majority of the cost to come from your pocket.

I have 3.56GHz stable on my 680I board w/ an E6300.
 
Back
Top