New Build

Jenova

Limp Gawd
Joined
Dec 31, 2005
Messages
224
Hi, everyone. This is my first build since 1999-2000. I just need opinions regarding compatability (especially memory). The build will need to last several years, so I went with a GTX, Q6600, and 4Gb of memory. I will try to overclock slightly, maybe to 3.0Ghz. This rig will be primarily for gaming.

Old Build: Athlon XP +1900
MSI KT133A motherboard
512Mb PC133 RAM
Geforce 6600GT 128Mb
Western Digital 160Gb hard drive
Soundblaster Live Value! soundcard

New Build: LIAN LI PC-A05B
Intel Q6600 G0
ASUS P5N-E SLI LGA 775 NVIDIA nForce 650i SLI ATX Intel Motherboard
G.SKILL 4GB(2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL5D-4GBPQ - Retail
EVGA GeForce 8800GTX 768MB 384bit GDDR3 PCI Express x16 HDCP Video Card Retail 768-P2-N831-AR
Seagate Barracuda 7200.10 ST3320620AS (Perpendicular Recording Technology) 320GB 7200 RPM SATA 3.0Gb/s Hard Drive - OEM
[url=http://www.newegg.com/Product/Product.asp?item=N82E16835186134]ARCTIC COOLING Freezer 7 Pro 92mm CPU Cooler - Retail

[/url]CORSAIR HX CMPSU-620HX 620W Active PFC NVIDIA SLI Certified Modular ATX Power Supply Retail
 
Ditch that mobo if you don't need SLI. Despite what people think, it's actually cheaper to just get a new card rather than a second SLI capable card. You also get more performance that way as well.

I recommend going with this mobo:
GIGABYTE GA-P35-DS3R Intel P35 Motherboard - $130

Also, I recommend getting a better cooler if you want to OC to 3.0Ghz. The AC7Pro won't do that good of a job at cooling an OC'd Q6600 then the two HSF here:
Scythe SCNJ-1100P Ninja HSF - $36
Tuniq Tower 120HSF - $50

Oh and you can get the Corsair for cheaper here:
Corsair HX620 620W PSU - $147
 
I agree with Danny. You definately want a better cooler, like the Tuniq, if you want to OC a quadcore. They put out double the amount of heat than dual cores.

What made you choose the P5N-E SLI?

What size monitor do you have?
 
The power supply is actually cheaper at clubit.com. And I don't really know if I'd need SLI or not. I might down the road, but by then, there'll probably be a high-end graphics card that will be capable of beating a 2x8800GTX setup.
 
I picked the Asus P5N-E SLI for the SLI capability, nForce chipset, and low price. Is the Tuniq equal or better than an Extreme Ultra 120? Is the Tuniq silent? Also, I have a Sony 24" FW-900 monitor.
 
If you're planning to go SLI at any point a 680i LT is about as low as I'd go. Makes little sense to me to limit $1200 worth of GPUs by not spending $50 more on a motherboard.

Of course I'd also get a higher rated PSU with 4 native PCIe power connectors. I obviously am a fan of the PC Power and Cooling Silencer 750 Quad, but a Thermaltake Toughtpower 750watt is another good option, as would be a comparable Silverstone, Xclio, or Etasis unit.
 
If you play games at 1920x1200, then you'll be better off with an Ultra, if its only like $50 more than the GTX.

The nForce chipset runs hotter than the Intel chipsets, so be prepared to re-seat the chipset heatsinks/fans. If you'd like to keep SLI as an option, I agree with Silent-Circuit... go for the 680i SLI LT at least. The eVGA 680i SLI A1 rev board is probably the best option, though.

You are right about SLI as an upgrade path... there should always be a better single card solution that will outperform an SLI setup of the previous gen cards. If you'd rather not spend so much money on an SLI setup, a single Ultra would suffice. In which case, you should go for the Abit IP35 Pro, Asus P5K-E, Gigabyte GA-P35-DS3R, DS3L, or Abit IP35-E.

The Tuniq performs almost as good as the TR Ultra 120x, but costs much less. The TR is completely silent, since it comes with no fan, lol. It all depends on the fan you put on it. Also, the fan on the Tuniq is changeable, if its too loud for your taste (though, it does come with a fan controller).
 
I may go with the eVGA TR 680i mobo. It's inexpensive and gives me the option of SLI, if I choose to use it. Also, is the TR compatable with the 45nm Penryn?
 
Do not get a TR (680i "SE"). The TRs cannot OC quad cores and are not eligible for the Step Up program.

You'd be better of with a 680i LT if you aren't willing to spend the money on a NF68-A1, or you could get a NF68-T1 and the only difference is a shorter warranty and a few less bundled cables.

Again: don't get the TR. It's all of $20-30 more to avoid a number of headaches.
 
Yes, the NF68-T1, NF68-A1 680i, and 680i LT boards from eVGA will support Wolfdale/Yorkfield 45nm CPUs when they're released. eVGA has confirmed this -- all that's needed is a BIOS update.
 
I've narrowed it down to the Abit P35E Pro and eVGA NF68-T1. I don't think I will ever use SLI any time soon, since I'll step-up when G92 is launched. Thanks goes out to everyone who helped with the purchasing decision.
 
Back
Top