New build won't power up

zzz

Gawd
Joined
Oct 9, 2006
Messages
801
When I press the power button, nothing happens. If I unplug the power, wait a while, and try again, sometimes the fans spin a couple revolutions, but that's it.

I swapped motherboards but it didn't change anything. I tried unplugging everything but the mobo, CPU & fan, and the power supply 4-pin CPU connector and 24-pin ATX connector, but there was no difference. On my old computer, the fans all still power up if I remove the memory and video card, so it seems safe to rule those from causing the problem.

Think either the power supply or processor is bad? FYI it's a Seasonic, DS3 mobo, and C2D.
 
when my old computer stopped working my processor was one of the parts that died when I was trying to fix it. Everytime I tried to turn it on only the fans came on but that was it. No post, beeps, nothing. Did you try checking the connector on the processor to see if you didn't bend anything?
 
Did you try checking the connector on the processor to see if you didn't bend anything?
Well, the processor uses a ball grid array so there's nothing to bend. There's pins inside the socket, but they all looked straight, and also both DS3 motherboards didn't work, so they can't be the problem. I'm kind of wondering if I put too much pressure on the CPU when installing the heatsink.

I'll be getting a new PSU monday, so if the problem persists, I suppose I'll RMA/exchange the CPU--unless someone else has a better idea ;)
 
Well, the processor uses a ball grid array so there's nothing to bend.
Sorry, just had to correct you... its actually a Land Grid Array, hence the name of its socket, LGA775. Still, you're right, there are no pins to bend on either packages.

Anyhow, have you tried pulling the mobo out of the case and powering up with just the psu/cpu/mobo/vidcard/ram (single stick) on top of the mobo box? If the thing doesn't even power up, it may be a short. It could also be a PSU issue. Have you tried re-seating the CPU?
 
So that's what LGA means, thanks.

I already reseated the CPU when I swapped motherboards. I've thought about the possibility of a short, but it seems too unlikely. But I REALLY want this fixed, so I'll try that in a minute and let you know.

Like I mentioned, on my old computer (KT266A mobo, AthlonXP) I can power up w/o the RAM or video card connected. Everything powers up and the fans spin, and it beeps a lot. So I assume the same thing should happen with a new C2D-based system. So when I try to boot up w/o the RAM or video card connected, and it acts dead, can I rule out the possibility of those components being bad?

Your help is much appreciated!
 
So when I try to boot up w/o the RAM or video card connected, and it acts dead, can I rule out the possibility of those components being bad?

Sorry no you cant. All need to be there and working before it will do anything.
 
Sorry no you cant. All need to be there and working before it will do anything.
Really?? That changes everything. So apparently today's hardware requires a video card and/or memory for the fans to run.

On my mobo's specs it says "Notice: Only DDR2-800 memory supporting JEDEC approved 1.8V operation with timings of 5-5-5 or 6-6-6 is supported on Intel Desktop Boards based on Intel 965 Express Chipsets." The memory I got is "4-4-4-12, 1.9V"! One reviewer of the memory said it worked on his DS3 board, so I thought I was okay.
 
Without memory or vid card, it should power up but you will get the bios beeps for the missing part.
Its one way of testing parts if you have no vidio signal or bios beeps but all the fans spin.

If the fans just twitch and nothing else happen then the PSU is not getting a power good signal from the MoBo.
Check that there is not a short & the MoBo is switching itself off to save its self.
Take the MoBo out of the case and put it one the MoBo box.
Attach PSU, CPU & heat sink, vid card & one stick of memory.
Now see if it will boot.

That the first test I do when that happens.

Second test is to swop the PSU just incase the first one cannot supply the correct power for a new system.

Luck .............. :D
 
Thanks Tigerbiten. I pulled the mobo out of the case but it still behaved the same--no short.

The PSU is a Seasonic 650W, so it should be plenty. Tomorrow my "real" PSU will arrive (Seasonic 500W). If that other PSU still doesn't make it work, is the CPU the only thing left that could be wrong? If you're right and BillParrish is wrong (and no video card or RAM is required for the fans to power up), then it seems like the only thing left is the CPU.
 
I replaced the CPU with another E6600, and also connected some DDR2-800 5-5-5-15, and the problem still exists. It's really looking like the PSU now, or else maybe I hooked up something wrong. Tomorrow I'll have another PSU to try.

Sometimes when I try to turn it on, the PSU lets out a short squeal! I recorded it (squeal).

Here's two pictures of everything connected (pic1 pic2); does it look right? Is there some jumper on the mobo I'm not aware of, that needs to be set? There's no HD or CDROM connected, and I also tried it w/o the video card and RAM. I know the CPU really needs a heatsink, but lately in my trials I've been ready to kill the power within a second if it actually finally starts up.
 
It'll jprobably kill the power for you in less than a second without a hsf attached. Attach it already and see what happens.
 
It'll jprobably kill the power for you in less than a second without a hsf attached. Attach it already and see what happens.
I've had it on and just took it off when I swapped CPUs. It's back on now. Thanks though.
 
Here little rule of thumb techniques:

Format: Symptom: Problem
"My PC won't turn on! It just..."
...does nothing: Bad PSU
...flickers on and the fans spin for just a second: Usually a physical short on the motherboard, rarely bad PSU or motherboard, rarely incorrectly seated CPU (nudge it a little)
...turns on and then shuts off (after predictable amount of time): Bad PSU
...turns on and then shuts off (after increasingly smaller amounts of time): CPU overheating + reaching critical temp (touch CPU heatsink... can you feel a singe?)
...repeatedly turns on and then quickly shuts off: bad PSU
...seems to turn on, fans spin, but nothing happens: Usually bad motherboard, rarely bad CPU, sometimes bad/incompatible memory (though some board beep when this happens), failed overclock, see message #8 on this thread for more possibilities.
...beeps at me: troubleshoot beep code as specified in manual or by BIOS mfr --> (beep code quick reference)
...beeps at me three times, repeatedly: check memory
...beeps at me in a two-tone siren: check VGA card power connector
 
The new PSU works! The new one is a Seasonic S12-500W, while the other was a S12-650W. Thank you so much for you guys' assistance. I hope I don't have other issues now. My 4-4-4 memory seemed to post just fine, so I wonder how well that will work....
 
Back
Top