New Build Suggestions (Gaming & Graphics)

Joined
Dec 27, 2007
Messages
7
Greetings [H]forums, I'm in the market to buy a new computer and I'd like some opinions and oversight before I muster up the cash for this..

So here's what I'm currently looking at:

($277.99) Intel G6600 G0
($279.99) SAMSUNG 226BW
($179.99) Cooler Master Cosmos
($359.99) EVGA 512-P3-N841-A3 GeForce 8800GTS (G92)
($99.99) G.SKILL 4GB(2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)
($129.99) Cooler Master Real Power Pro RS-750-ACAA-A1 750W
($39.99) ASUS 20X DVD±R DVD Burner
($179.99) ABIT IP35 Pro LGA 775 Intel P35
($179.99) Microsoft Windows Vista 64-Bit Ultimate

Thanks again guys!

Edit:

- Removed the Fatal1ty X-FI soundcard
- Changed the ram to similar suggested
- Added ABIT IP35 Pro LGA 775 Intel P35
- Added Western Digital Caviar GP WD10EACS 1TB 5400 to 7200
- Removed Windows Vista Ultimate DVD
- Added Windows Vista Ultimate OEM 64-Bit
 
Couple things...

1st, you need a motherboard. The P-35 based aBit IP-35 Pro, Gigabyte DS3R, and Asus P5KE are the hot tickets right now, but rumors concerning the new Yorkfield delay point to these P-35 boards as the cause for it. If you're looking to upgrade to a Yorkfield, you may want go X-38 to be on the safe side... although if you're really looking to OC the daylights out of a Yorkfield, you would be best waiting for a 1600mhz X48 or 790i board, in hopes that it can achieve a higher max FSB. The lower multipliers on Yorkfield chips may very well mean that a G0 Q6600 can OC past them all, with the exception of the Extreme and possibly the considerably more expensive Q9550.

2nd, as far the Q6600 goes, you don't need 1066mhz RAM. It's a waste of money. The full OC potential can be reached on PC-6400 RAM which can be had for under $50 (2 gigs of a good set.) Enginurd has an excellent, concise cut-in-paste that he posts everywhere explaining the math behind this.

Mark.
 
Few Suggestions.

Why don't you drop the retail version of Vista & get the OEM version? I would also suggest dropping the sound card, unless you are an audiophile? onboard sound has come along way. I also suggest upping the ram to 4GB. You can get a 4GB G.Skill kit on newegg for under $100.

or...stick with 2GB ram, get OEM vista/no sound card & upgrade to a 24" monitor?

or...save even more money and get an 8800GT from eVga then "Step up" in February?

How about your hard drive? I didn't see you mentioned one. With the money you will saving by using OEM vista & no sound card, you can purchase a 1TB hard disk or run two Seagate Barracuda 7200.11 ST3500320AS 500GB 7200 RPM 32MB Cache SATA 3.0Gb/s Hard Drives in Raid 0 (if you want raid)

help that helps.
 
Iv had that monitor for a couple months. I love it. I want another one. Droool. Price has come down 50 ish bucks since i got it at best buy. You can probably get it cheaper online but i wanted instant gratification.
 
Alright made my order. Absolutely satisfied with what I'm expecting (thanks again for the suggestions guys!) however I still face one dilema..

I need a computer desk, and BAD. The current desk I'm using I got it eons ago.. My current desk's surface sits 2.5ft from the floor. The pull-out tray was small and the tray rails took heavy wear as they were pretty cheaply made, so I tossed the tray eventually.

I have a decent leather chair with arm rests that sit about 2.3ft from the floor. This causes some problems for drawing as my hands don't sit comfortably in line with the surface of the desk. I could possibly use another chair however. Other problems are the dimensions of my current desk - 1.9ft x 3.5ft which makes a tablet sit just in front of my monitor, making me sit even closer to the monitor and I have to usually sit my keyboard in my lap.

Basically I need a decent sized, relatively cheap desk ($100-250 range would be nice) with extra room at the front either from a spacious pull-out tray or a large flat plain surface. I was thinking of something like this:

gabrielaboonedevartcomppu5.jpg


So I was wondering if anyone knows where I can get a good desk for approx $200 and under. Maybe you could suggest a site that sells computer furniture online.

Perhaps if your desk is of good grade/price and space, you could suggest it to me too. Keep in mind I need the extra space at the front for drawing on my tablet.

I'll also check out local stores soon perhaps to see what I can find.

Thanks as always.
 
Yea, OfficeDepot has a great office desk that I am using, desk and hutch. Its the Matrix Onyx. I got the desk and hutch for around $140 otd ($200+tax originally) with coupons you can find online. Its huge, stylish, and practical for a computer desk. I really do like the glass top too. I got a corepad xxxl to use with it and there is still a lot of room left.

Here is my future build


good luck on the desk.
 
Check out Ikea as well. They do have some pretty big desks out there for cheap. I got my Vika Amon and Vika Curry for $50 total. It's a pretty decent sized table.
 
I'm trying to research a new system, and the parts the OP listed are pretty much what I was leaning toward getting. I'm a little confused about what was listed though. Hopefully there's an easy explanation for this.

($277.99) Intel G6600
($279.99) Intel Core 2 Quad Q6600

Same thing? I'm trying to google this and I'm having a hard time finding a Q6600 that isn't an nvidia card. Plus, they're about the same price. I'm going with typo, but I just want to know for sure. I thought I had this stuff figured out.
 
Sorry, I'm in the process of building a new computer as well, and I was wondering if this Asus P5K-E is the good mobo people have been talking about:

http://www.b-com.ca/product.php?prod...cat=297&page=1

Also, would this ram do well for 64bit gaming?

http://www.memoryexpress.com/Products/PID-MX19221(ME).aspx

I'll be getting an 8800GT 512mb, Q6600 and a Corsair HX520 for a power supply or is that too low?

The P5K-E is good, but do you need all of its features? That RAM is fine -- pretty cheap, actually. Yes, the Corsair 520W is MORE than enough for your system, based on what you've listed so far. However, it would be good if you started your own thread and provide as much info about your build as possible.

I'm trying to research a new system, and the parts the OP listed are pretty much what I was leaning toward getting. I'm a little confused about what was listed though. Hopefully there's an easy explanation for this.

($277.99) Intel G6600
($279.99) Intel Core 2 Quad Q6600

Same thing? I'm trying to google this and I'm having a hard time finding a Q6600 that isn't an nvidia card. Plus, they're about the same price. I'm going with typo, but I just want to know for sure. I thought I had this stuff figured out.

I have no idea what the G6600 is, lol. If you say its an NVIDIA part, then its probably a GeForce 6600GT, but it wouldn't cost as much as a Core2Quad, since its a GeForce 6 series card, and we're currently on the GeForce8-9 series. The Q6600 is a Core2Quad Intel CPU. It would be good if you, too, started your own thread with as much detail as possible.

Check out Ikea as well. They do have some pretty big desks out there for cheap. I got my Vika Amon and Vika Curry for $50 total. It's a pretty decent sized table.

I agree, Ikea has some cheap options. So you have the Vika desk, too, eh? Anyway, I know you've seen mine, but here it is again for anyone else who'd like a look...

vika_amon_x2_rated_g.jpg


Two Vika Amon desks w/ Vika Curry legs... all under $85.
 
Sweet build! And you're right it is similar.

As for the Q6600, that was a typo. I meant to remove the other. The $277.99 Q6600 I found off of ClubIT.com which offers G0 stepping.

Anyway thanks again guys I'll let you know if I find a good table. I've been looking at Staples and OfficeDepot. I found one almost exactly like the one in the pic above at Staples, but it wouldn't fit my monitor. I'll check out Ikea now.

That OCZ ram should be fine as far as I know. But I'd get G.Skill or Corsair instea due to the lower voltage (1.8) and overclocking potential. But as far as I know, those are pretty good sticks for the money.
 
I agree, Ikea has some cheap options. So you have the Vika desk, too, eh? Anyway, I know you've seen mine, but here it is again for anyone else who'd like a look...

vika_amon_x2_rated_g.jpg


Two Vika Amon desks w/ Vika Curry legs... all under $85.

Great desk for the price! I love mine. :)
 
Alright, got a good $299 one marked down for $199 from Office Depot. After looking at several places Office Depot seemed to have a few attractive desks. The one I got's called the 'Empire Desk'. I could've gone lower on a $100 glass setup I saw which had everything I'd need practically besides any drawers or shelves but I decided the Empire was of good make, form and function. :) I don't have any pics sadly but I can scan the manual later. (Drivers aren't installed and my old All-in-One Lexmark ain't plugged in.)

Now I just need to hold off until next week to get everything and assemble it. (I probably should've gotten this done before the weekend..)

I'd say I'm quite spoiled this season.. But I did need most of it. ;) Anyways thanks for everything [H]forums. Hopefully I won't be asking any knuckle headed questions on how to assemble any of it..
 
The desk I bought at a local Office Depot. The computer I ordered from Newegg. I got tons of rebates from Newegg but I didn't use any coupons, no.
 
Back
Top