New Build Rarely Posts/Locks up in Windows install

blakangus

n00b
Joined
Jul 12, 2004
Messages
40
I just built a new system, specs are:
X2 5000+ Retail
Biostar MCP6P (also Foxconn A7VMX) mATX mobo
Antech Earthwatts 650W psu
2x2gb Gskill ddr2 pc6400
MSI R4670 512mb gpu
Antec 300 case
Hitachi Deskstar 320gb sata hdd
LG 22x IDE dvd multi

I originally put it all together with the biostar mobo and the system would only post occasionally, but always freeze when i tried to go into the bios. once it went into the bios, but this was out of at least 100 tries to get it running. so i ordered a new foxconn mobo and changed everything out. it originally did not post, but after 6 or 7 tries it beeped and posted, and i got into the bios. however it would often freeze mid-post and everytime i put the vista business oem cd in it would 'load windows files' but freeze while doing this. now the foxconn mobo will not beep or post at all. please help!
 
Take it down to the lowest common denominator. unhook all drives, just have CPU memory and video and PSU hooked up. Does it post then ? If it does then add hard drive, etc... Could also take it out of the case and try it that way just bare minimum needed to post. In a situation like yours I always try aother PSU first as it's the quickest, easiest to check.
 
Definitely read the Troubleshooting guide and proceed from there
 
Ok, I read the sticky, and built the 'bare minimum' build. I narrowed down at least one problem to a bad stick of ram. I can now get into the bios with just one stick. I attempted to install windows and it froze when it began the actual install process many times. Now I get a reading before windows boots "BOOTMGR is missing'. Would it be the hdd because it froze when it attempted to copy files to install windows?
 
I actually got that same error when I just built my dad a computer, it turned out that I forgot to format the partition after I created it, I know it sounds stupid but it worked for me.
 
Is your RAM set to the recommended voltage? I had a very similar problem on my computer, and I thought it was the RAM too.... turns out I hadn't properly set the RAM voltage :p

I would definitely check your settings vs. the manufacturer's specifications.
 
Back
Top