New Build Advice

CpuMan

Gawd
Joined
May 6, 2005
Messages
608
I was going to upgrade my existing rig in my sig and just recently got a evga 7600gs agp from newegg . But after some thought I am thinking of returning it to newegg and updating my Motherboard, CPU, Ram and replacing the 7600gs agp with a 7600GT pcie.

My budget is only around $600.

Here is what I was thinking. I would like to do some overclocking but nothing extreme, maybe getting a e6300 to around 2.4 to 2.8ghz, I would be happy with that. I consider stability more important than getting every last ounce of performance. I welcome suggestions,

Processor,
http://www.newegg.com/Product/Product.asp?Item=N82E16819115005

Motherboard,
http://www.newegg.com/Product/Product.asp?Item=N82E16813128018

Memory,
I need suggestions. I would like to get 2x1gb of memory.

GPU,
http://www.newegg.com/Product/Product.asp?Item=N82E16814130062

Everything else I would like to reuse from my current system in my sig. My only question mark? is my powersupply. I am still using the one that came with my antec case. It is a 380 watt true power. Is it enough?

Thanks for any suggestions/advice.
 
How old is the PSU? it will be enough for a little while, if it isn't too old. I'm guessing its aged, so get a new one soon; but for now, it should be fine. Look at the G.Skill 2GBNQ if you don't want to OC past 7*400=2.8Ghz. If you want to go past that, you'll need some OC'able ram, like the Buffalo firestix DDR2-800 or Patriot LLK DDR2-800 sticks. Those use micron ics, so they should be able to reach 500, and 7*500=3.5Ghz, but you'll need a tuniq tower or equivalent.
 
My friend just got E6400...very nice
He also got 1GB of Kingston DDR2-6400 ram, Asus P5N-E 650i mobo, 300GB Maxtor HD, and Antec case with 350W PSU...all that for $690...all brand new from Frys Electronic local store

He was only missing a video card, so i gave him my old video card which is Asus 6600GT 128MB


I personally was amazed how cheap stuff was at a local store
 
This is my updated line up. Any comments on the memory would be appreciated as to how well it would work with the GIGABYTE GA-965P-S3 and get the e6300 to 2.4ghz?

At stock speeds, the ram will get you 7 * (675/2) = 2.36Ghz. If it can OC a bit to DDR2-686, then you would reach your goal. I think you have a good chance of that. However... for $5 more, you could go with the G.Skill 2GBNQ DDR2-800, which can get you at least 7 * 400 = 2.8Ghz stock, which should still be fine with the Intel stock cooler or zalman 7000. The avg speed the E6300's are reaching is around 3.2Ghz, so 2.8 should be easy. My pair of those same g.skills reach around 450Mhz with 2.1v, just an fyi.

$170 - G.Skill 2GB (2x1GB) DDR2-800 F2-6400CL5D-2GBNQ
 
At stock speeds, the ram will get you 7 * (675/2) = 2.36Ghz. If it can OC a bit to DDR2-686, then you would reach your goal. I think you have a good chance of that. However... for $5 more, you could go with the G.Skill 2GBNQ DDR2-800, which can get you at least 7 * 400 = 2.8Ghz stock, which should still be fine with the Intel stock cooler or zalman 7000. The avg speed the E6300's are reaching is around 3.2Ghz, so 2.8 should be easy. My pair of those same g.skills reach around 450Mhz with 2.1v, just an fyi.

$170 - G.Skill 2GB (2x1GB) DDR2-800 F2-6400CL5D-2GBNQ

Thanks, good advise. I edited my post above.
 
ds3 prices dropped on newegg btw to 122 for the rev 3.3 board.

I see that and the s3 dropped to $107.99.

I wonder why it says the s3 is quad core ready but the ds3 is not? It looks like the only difference between the 2 are the better caps on the ds3.
 
There are a couple more that I found out when researching the differences. Other than the caps, the ds3 has different ethernet jacks along with different onboard audio (slightly better?) and has 4 fan headers vs 2 on the s3. There were a couple more that I can't remember but from a couple of posts on other forums this is what I found out the differences being. Both boards have the same OC potential it seems.

Do you have room for a 7900gs (145 AR, 160 before rebate) in your budget?



edit: this is one of the posts on this forum that mentioned the differences. http://www.hardforum.com/showthread.php?t=1160446
 
Thanks for the link. I still have time to decide between the 2. I like the low price of the s3 but if stability suffers I might go with the ds3.
The 7900gs is a great card but my budget is tight so I am sticking with the evga 7600GT for now, it seems like a good bang for the buck, just not quite as good as the 7900gs as far as performance. I sent the 7600gs agp back to newegg. Had to pay the $18 restocking fee though. I am back on my old ati 9600.

Don't forget to keep me informed on how you like your setup. :)
 
Back
Top