New budget build 6320

kirbster

2[H]4U
Joined
Mar 24, 2000
Messages
2,585
Nice chip!
3.5 Ghz stable @ 1.5V. CPU-Z shows 1.425 under load.
Tuniq Tower 120 and Gigabyte P35C-Ds3R.

Orthos running small FFTs temperature never goes above 52C. TAT saw 55C.

I am a happy camper!

Got the board open box for $90, the Chip new sealed for 120 and the Heatsink for 49.

Kicks the crap out of my old setup.
 
If you truly want to see if it is stable run F@H on it. It is the last word in rock solid stable. If you can run that nothing will take it out.

Plus it's for a good cause :D

 
OP - Nice OC there. Its aggravating when everyone else's 6300/6320 goes up to 3.4-3.6. Mine stops at 3.2 but it could be my FSB limitation (damn 7x multi).

And LOL @ folding. I usually run prime, orthos, or OCCT to see limitation. I down clocked my processor and voltage today, did I save a tree too? lolz.. My electric bill was lowered, as well as my gas bill b/c MY PC HEATS MY WHOLE HOUSE ITS SO HOT GUYS :rolleyes:

Futile medical/calculation experiment = justified expensive fun box.
 
I havent pushed higher as i am already overclocking my mushkin HP2-6400 by 100mhz.
My goal was 3.2-3.3 so i am pretty happy where i am.

500FSB= 1000DDR2 speed. Totally stable here as far as i can tell. Orthos running blend for 7.5 hours when i left fro work this morning. Hoping that it is still running.

I have budget rig two in progress.
E1200 celeron Asus P5B-E and 2 gigs of OCZ Reaper HPC 6400.

Hoping to get it to 3.4 or so.

Fun Fun Fun.
:D
 
i bought an e1200 for fun too and it stopped at 3.0ghz on 6x,7x, and 8x multi... BUT some guys on XS got there's up to 3.4 or 3.5. Not too shabby for $60, although the Pentium's 1mb L2 puts it leagues ahead for roughly the same price. OC'ing ftw ;)
 
well i seem stuck at 2.8 at the moment. I will play more later. It still kicks the living crap out of teh 3000 sempron it is replacing though.

Right now i have a 7600gt in it and it screams for what it is.
Oh well. I will keep trying and see how far i get it. right now i am using a full size Intel cooler, not the tiny one they supply.
 
well i seem stuck at 2.8 at the moment. I will play more later. It still kicks the living crap out of teh 3000 sempron it is replacing though.

Right now i have a 7600gt in it and it screams for what it is.
Oh well. I will keep trying and see how far i get it. right now i am using a full size Intel cooler, not the tiny one they supply.

That tiny cooler is garbage. Awesome budget build.
 
had to ditch the P5B-E as it did not fully support the E1200. Weird!
couldnt keep it stable and started going backwards!

Changed it out for a Gigabyte GA-G31M-S2L and humming along at 3 Ghz. 1.4V stock full size Intel cooler. never goes over 60C with orthos on small ffts.

I tried a Coolermaster Hyper TX2 and it did not cool any better than the Intel cooler! Wasted 25 bux right there! May try it again but at this point....?

Only issue with the Mobo is a lack of 1:1 memory setting so my ram is at 1000 right now, but it all appears stable.

Anyone want a P5B-E that is like new!
;)
 
I had the TX2 for a bit and it worked well... a good silent solution. I broke it though, i think.
 
Back
Top