new BIOS for Neo4 Plat.?

MrSlacker

[H]ard|Gawd
Joined
Jun 1, 2004
Messages
1,218
does anyone have any info on new BIOS for Neo4 Plat. i know there are betas for SLI version, but didnt see anything for Plat. thanks
 
they have 2 new betas, but i dont know if anyone tried them already. wats the worst that can go wrong?
 
I tried a beta for the Neo4 SLI. I ended up flashing back to the original though because that BIOS did wacky things since it was for the Diamond version of the board. It would hang on me when detecting an IDE RAID which I didn't have. So worst case scenario, it doesn't work right and you flash back to your old one (unless you screw up flashing in the first place :( ).
 
Were you talking about the Neo4 Platinum Ultra or SLI?
 
MrSlacker said:

Are you using the 1.1 version of the BIOS? If I remember, they did release a 2nd bios, and I was disappointed that the SLI version didn't get an upgrade. Also, I'm not sure you'd have a problem with an Ultra beta BIOS because I think all the ultras are the same. If you're disappointed with your BIOS, try a new one and see if it fixes your problems :). You can always flash back.
 
i have 1.1 i dont want to be the 1st one to fry their board with a bad BIOS so i'll just wait
 
Where's the BIOS update for the Neo4 Platinum SLI :( ....*grumble*
 
nice! just in time. my bro is coming home today and he will help me flash it. w00t
 
I've flashed the new 3.10 Bios from my MSI LiveUpdate 3.0 setup and my system does feel a lot more stable.

I've yet to test the overclock issues with Winchester cores, but I do think it's worth the download.
 
New Platinum SLI Bios available also (3.1). Just flashed to it. Maybe my Winchester Voltage issues will go away :).
 
i flashed it to 1.2 max voltage for CPU is not 1.45 BUT u can go over by 16% and it tells you what voltage will you get. i was hoping new BIOS will let me OC more, but no luck. gonna call MSI and see if i can get a new board. or should i call newegg?
 
Mr. Slacker, do you run a Winchester? Do you have any posting problems with it (supposedly due to voltage)?
 
I just looked at the new settings, and you can set CPU VID to 1.425, then overvolt it by 20.0%, giving you 1.71 volts. The voltage on the board tends to fluctuate though, my voltages are usually +/- .05volts of the BIOS setting.
 
kirbyrj said:
Mr. Slacker, do you run a Winchester? Do you have any posting problems with it (supposedly due to voltage)?
yeah i have winnie and sometimes i have posting problems.

UPDATE: i found my OC problem. its the BIOS because when i use ClockGen, i can get it to 260, but in bios only to 227
 
Back
Top