Need PCI Mounting Bracket for Perc5/6

AMD_Gamer

Fully [H]
Joined
Jan 20, 2002
Messages
18,287
I just ordered the Perc 6/i and it does not come with the PCI Bracket for mounting into a normal case. Does anyone know where I can get one like shown in the picture below?

If anyone has one I could buy from them that would be great.

WZ4GQ.jpg
 
I took the brackets off some old NICs I had and used those for my PERC5i. Only the bottom screw tab was aligned so I had to saw off the top tab. In my case, one screw was sufficient to hold the card in place.
 
Yes. Had to do the same for a PERC 5/i & H700.

What I don't remember is if the brackets came with screws.
I don't believe they did, but any old similar full-height PCI card with a bracket
will have screws you can use.
 
Yes. Had to do the same for a PERC 5/i & H700.

What I don't remember is if the brackets came with screws.
I don't believe they did, but any old similar full-height PCI card with a bracket
will have screws you can use.

I think motherboard screws should work? otherwise I will just take the card and bracket to local hardware store.

Thank a lot.
 
Yes. Had to do the same for a PERC 5/i & H700.

What I don't remember is if the brackets came with screws.
I don't believe they did, but any old similar full-height PCI card with a bracket
will have screws you can use.


Don't know why I said that about the PCI card ... it doesn't matter .. just need any card
that has a bracket on it and the screws from it will likely work.

ISA ... EISA...MCA....VESA... PCI-x....PCI-e.. all we care about are the screws to the bracket.
I know you have to have an old 56k modem card laying around :)
Maybe an old vga card? LPT or Serial port?

I am not sure about motherboard screws (im thinking they'd be too big).
 
Back
Top