I have a 2.40C running at 3.3GHz at 1.575v. CPU-Z displays it as 1.536v. I want to get this thing up to 3.6GHz but my 865PE Neo2-S doesn't have the option of 1.65v, just 1.6v and 1.7v, etc. I was wondering whether 1.7v would be ok, or should I just forget about it?
![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Need Help w/ 1.7v
- Thread starter Shorty
- Start date
i'm at 1.7v with my 2.4c. i have the zalman 7000cu along with 6 case fans providing cooling and everything is ok, prime is stable and temps are not bad (in signature)
i would never go any higher then 1.7v and consider that an absolute max, however mine is running fine.
that is with an abit 1c7 but temps are ok even if abit is off by 9 degree's i'd still only be at 60.
i would never go any higher then 1.7v and consider that an absolute max, however mine is running fine.
that is with an abit 1c7 but temps are ok even if abit is off by 9 degree's i'd still only be at 60.
flapperhead
n00b
- Joined
- Mar 12, 2004
- Messages
- 32
sounds like u have a highly overclockable 2.4c. make sure u have the hs fitting correctly and u have good venelation cause thats too hot in my opinion for stock voltage at that speed. if i were u id be dying to see how far i could get it... goodluck flapperhead