Need help swapping motherboards.

Joined
Aug 11, 2004
Messages
23
My current motherboard is dead. All I want to do is swap the dead board with a different, new motherboard. Once I swap all the parts from the old board to the new board, what's going to happen when I power on? The hard drive will still have windows xp and all the previous drivers. Will I have to wipe the hard drive clean and start from scratch, or can I somehow just load the new motherboard drivers and be on my way? Will all my other hardware drivers still work?
 
Pre SP1 You would get a BSOD upon boot from a motherboard change. I dont recall if you would get it with SP1 or not but I recently did that with a PC that had SP2 on it and I was able to load up current MB drivers. The cleanest way to do it is to run something like sysprep on it.
 
Thanks, not sure what sysprep is but I'll google it or something. Guess I should mention this is an ancient computer setup, using P3 socket 370. It's just used for internet and email mostly.
 
My ideal situation would be buying the same motherboard so all the drivers would be the same. Can't find it for a descent price though. The used Tyan s1854 is going on Ebay for what other brand new boards would cost.
 
Usually a repair install of WinXP is all you need to get things running again. It doesn't mess with most of your settings. That's if you're using WinXP.
 
Back
Top