Need help finding a motherboard..

Proxy

Pumpkin Ghost
Joined
Apr 24, 2005
Messages
4,308
Hey guys, I have a customer that wants me to replace their PC. The problem us, they still use a dot-matrix printer for their company. So I need a mother board that has LPT/COM ports, or at least one with an add in card.

Here is the one I found:

http://www.newegg.com/Product/Product.aspx?Item=N82E16813131222

The board needs to be as cheap as possible, and have the needed ports. Maybe I can just get a PCI card with the ports I need? Thanks.
 
Is this an entire system build? Like from scratch? Or are you replacing a motherboard.
 
New system build. It will use XP 32bit due to the printer they use for the company they own. I am just having a hell of a time finding a motherboard with what I need.
 
If that is all they use it for, I would just look around for some used parts and throw something together. I still have a p4 system being used by a friend and it is not that bad. I would build a socket A just for the fun of it. Grab a DFI NFII from someone here on the forums. http://www.pcstats.com/articleview.cfm?articleID=1527 I would then try to find one of the XP--M chips. Fun times indeed.
 
Would you like something used???

I have two complete systems in my basement that are fine.......
One is a shuttle with an Athlon 3500+
One is a rebuild EMachine with an 800 FSB Core2

I think both or either(most likely the emachine) would have the port you want. If you just want the MB from the EMachine, it's a retail ASUS board......I junked the original mainboard..........
I would just remove the HDDs and you'd have to install ne ones and the OS, if you want the whole system.

Let me know if this interests you.
Both systems are in excellent working condition, just in retirement due to upgrades with my kids.

If that doesn't suit you...........buy this board............it will last forever and has the appropiate legacy ports:http://www.newegg.com/Product/Product.aspx?Item=N82E16813131222
 
Last edited:
Can you check to make sure of the ports you have on those systems? If they have the ones I need then the second one maybe an option.
 
Can you check to make sure of the ports you have on those systems? If they have the ones I need then the second one maybe an option.

I'm at work, but I think the EMachine board is an ASUS P5E-VM......nearly identical to the newegg listing I posted.
If so I still even have the retail kit and box.

That said, if this is for a client, you may want to buy the retail kit since it will carry the newegg and ASUS full warranties.:p
 
Yeah, I am gonna go through NewEgg, for the Warranty. But thanks for the offer!:cool::D
 
any particular reason that this business wont swap out this printer?

We had a similar problem with our business..........our stuff was so old the software couldn't be updated to interface with a new printer..........and all our paperwork that was for printing was set up on the premise of the dot-matrix.
Eventually we replaced everything so we could have laser printing and faxing.

The re-do on the computer may be the only option.
 
Back
Top