Need help! Faulty MOBO?

scarTC

n00b
Joined
Dec 26, 2007
Messages
14
Hey guys I had a quick question regarding my PS/2 keyboard not working on initial boot up.

I just finished by new build, turned the computer on and get a screen on the monitor with an ABIT logo that says:

'press tab to show POST press DEL to enter setup'

Now the problem is that my keyboard doesn't work! Here's what I've tried so far..

I took the keyboard and hooked it up to another computer and it works fine there, so the keyboard isn't faulty..

I got a PS/2 to USB converter and hooked the keyboard up to that to see if a USB connection would work but still doesn't.

I tried using a completely different keyboard as-well and it also doesn't work.

Is it safe to say that my motherboard is broken? When I start it up it gives me the 1 beep so I assumed it was working properly. This is my first build that I've ever put together so forgive me if it's something really simple that I just am not thinking of..

Here's my hardware...

ABIT IP35-E Motherboard
Intel 8400 3.0ghz 45nm
8800 GT
2GB Ballistics
550 W Cosair
 
Try resetting the CMOS and then try the PS/2. If not, reset again and try the converter.

My IP35 works both fine with a PS/2 and USB keyboards.
 
Thanks for you reply.

I just took out the CMOS battery for 10minutes, put it back in and it still doesn't work. After the first "beep" the lights on the keyboard will flash, but then it doesn't work.

Anyone got any suggestions?
 
Use an actual USB keyboard?

Also, IIRC, a few of the Abit mobos do have some problem working with the new E8400 CPUs. I'll double check on that.
 
I have come across this problem many times and often the only solution that works is to plug in a PS2 keyboard and use that.
Its not fault of the motherboard but the way the BIOS is written.
Even enabling Legacy USB keyboard support doesnt work in many cases.

My last motherboard was an Asus A8N-E and for a while it did something similar out of the blue:
I wanted to get into the CMOS and while I could get in there with a USB keyboard, I couldnt change anything, no keypresses would register at all.
I tried again with a PS2 keyboard and used it to enter the CMOS. Both keyboards then worked fine in the CMOS.
So I tried going into the CMOS using the USB keyboard again but this time using the PS2 keyboard once in there and that also did not work.

So it seems that as long as a PS2 keyboard made the request to go into the CMOS, all keyboards worked fine when in there.
When using a USB keyboard to enter the CMOS, no keyboard worked.
Very odd.

Later, the problem evaporated and hasnt surfaced since now a friend has the motherboard using the same USB keyboard, PSU, CPU and graphics card.
One of those strange things.
 
Thanks for you replys.

I have tried a PS2 keyboard and it doesn't work. I've only tried connecting the PS2 keyboard up to a USB converter but that also didn't work. I guess the next step is to get ahold of a actual USB keyboard?

Do you guys see any signs here that my motherboard could be dead?
 
If a PS/2 keyboard doesnt work, the motherboard is shafted.
Time to RMA.
 
Ok Nenu that's what I figured.

Here's the screen I get when I first turn it on, obviously I need the keyboard to work to go to the next step =(

scrnso3.jpg
 
Damn I didnt read your previous post correctly.
I recommend using a proper PS2 keyboard to establish if the motherboard has a fault.
A USB adapter theoretically shouldnt make a difference but then theoretically we shouldnt be having this problem anyway.

Yes, you need keyboard control to get in to the CMOS setup.
 
Back
Top