Need a quick tip for case fan control.

[zamardii12]

So I've been playing a lot of Warzone lately and I've noticed my Micro-ATX build getting hotter than usual, and I realized that all my fans in my case are all just plugged in to run... none of them are thermally controlled. I think the only fan in my case that is thermally controlled is the CPU fan, so what is a quick and simple solution to plug all my fans into something that I can control through software and maybe have something setup so I can control at what temps the fans ramp up?

This is my motherboard btw: https://www.asrock.com/mb/Intel/H370M Pro4/index.asp#Specification


I found this thing, but not sure it would work for what I am doing: https://www.amazon.com/Electop-Chassis-Cooling-Molex-Controller/dp/B071KNT7FW

Also I found this... https://www.amazon.com/DEEPCOOL-FH-10-Integrated-Occupying-Motherboard/dp/B077YHLDSP

And this: https://www.amazon.com/SilverStone-Technology-Silverstone-Splitter-SST-CPF04-USA/dp/B07N3HP8S5

Not sure which is better or if these do what I want them to do...

Thanks for any tips!

 

[mtrupi]

Are your other fans plugged in and running? If the are already running full speed a controller won't help. Also looks like the splitters will send the same duty cycle signal to all fans which may or may not be okay.

 

[hititnquitit]

Are your fans 4pin pwm or 3pin voltage controlled? If they are pwm you can get any old fan hub and set up a curve through the bios. If they are 3pin youll need an actual fan controller or some kind of rheostat/rheostats to control the speed.

 

[Lucky75]

Aqua Computer aquaero 6 Lt USB Fan Controller
is great choice for any task with FANs and Pumps. I have one and it is wonderful for configuration and 24/7 use.

 

[pendragon1]

you have 4x4pin fan headers. is that not enough?

 

[LFaWolf]

If your fans are PWM fans, you can control the fan speed in BIOS/UEFI as well, but I believe ASRock has Windows software for the fan profile ?

 

[Lucky75]

If you want I am selling one:

BitFenix Recon Fan Controller

• SofTouch, ABS Plastic, Steel
• Fan Channels x 5
• Temperature Channels x 5
• Max Watts / Channel 10W
• Measurement Frequency Every 0.1 - 0.4 Seconds
• Temperature Alarm Range 30 Degrees -90 Degrees
• Temperature Range 0 - 100 Degrees

For detail on PM.