n00bie mobo question! s754 help!

Mudd

Limp Gawd
Joined
Nov 14, 2004
Messages
393
Ok, currently I have:

CPU: a64 3200 @ 2.2GHz
Mobo: Asus K8V Deluxe
Ram: 512MB OCZ premium ram
HD: 160GB Seagate Baracuda @ 7200rpm
PSU: 400W X-Connect
Gfx card: 9800 AIW pro


Ok, i'm looking for a new motherboard, preferrably one with an nFORCE 3 (250) chipset, and runs Daul channel memory @ pc3200, and is compatible with my system. I'm looking to overclock the graphics card and possibly the cpu (aftermarket cooling of course).

I'm looking to spend around $170, price can fluctuate a bit...but steer a n00b in a right direction!!
 
754's cant run dual channel. the memory controller cant do it. but id say go for the chaintech VNFV 250 or the DFI lanparty ut. those board oc like crazy.
 
Yeah but is there a possibility of the ram running smoother using close-latency memory?

I'm pretty sure to OC the CPU you need good ram dont you?
 
You can always run a memory divider to up your CPU speed, but leave your RAM speed close to stock. Memory speed doesn't make "that much" of a difference compared to CPU speed.

The DFI is the board to get in s754 BTW. It runs around $100. The Chaintech is around $75 or so. I personally had good luck with the Epox 8KDA3J which OC'd great, had the 250Gb chipset, and was the same price as the Chaintech.
 
Mudd said:
I'm pretty sure to OC the CPU you need good ram dont you?

Not with A64. But it's always nice if your RAM isn't total crap anyway. But the speed rating doesn't have that much directly to do with quality.

I don't know your mobo's specs and I'm too lazy to look 'em up right now. If you can do about 3.2V then there's TwinMOS TMSP/400 over at Newegg for $54 per 512MB stick right now that kicks some serious OC ass.
 
As already said, 754 doesn't support dual-channel RAM. As also said, the DFI is the board to get- I presume you want to stick to AGP for now?

May I also recommend that you get a motherboard for about $100 (like the DFI) and invest the rest in replacing your PSU? The X-Connect has a "reputation" already, and 400W isn't that much anyway. The guys at DFI-Street recommend at least 480W for 939, and a lot of amps on the 12V rail. The best bang-for-the-buck supply seems to buy FSP's Blue Storm, which is 31A/split-rail, 500W, and about $90.

BTW, PM me if you're interested in a cheap, semi-capable board. I'm getting a Gigabyte K8NS w/ box and all accessories as part of a trade, and I really don't need it since I'm switching to the DFI. It's based on nForce3-250, and its CPU voltage is half-decent- up to 1.7V. Yours for $50.
 
Asus K8N4-E Deluxe, as an alternative- available now, but I'd recommend the MSI.
 
I have no intention of going PCI-E anytime soon. 400W should be fine since I am staying with 754 not 939.

What do you mean X-Connect has a "reputation" ? Please clarify for the n00bs like me =)
 
X-connect = crash burn takes the rest of your system with it POS. id focus on getting like a Fortron or otehr good powersupply, and getting a new board. check out any of the Epox boards, they rock or chaintech VNF3-250 board, they clock real well.
 
Back
Top