MSI K9A2 = No Post

nitrobass24

[H]ard|DCer of the Month - December 2009
2FA
Joined
Apr 7, 2006
Messages
10,477
I bought a K9A2 recently and I cannot for the life of me get it to do anything.
I just get a blank screen. No beeps nothing.

What I have tried.
3 different PSUs
2 sets of Ram
No Ram
3 different GPUs in every slot.....one at a time
Clear CMOS

What else should I try?
 
I think I found the culprit.

I was examining all the pins and everything and there is about a 0.5cm crack in the side of the board by the CPU. It looks like its cracked across two traces.

I'd be willing to bet that is it.
 
Where do the traces lead? Power regulation circuitry? Northbridge? It sounds like a probable culprit but it'd be interesting to learn what disconnect can lead to the symptoms you mentioned (for future reference).
 
unplug all usb slots and try using a pci usb card, also it might help to swap out video and hard drives to find out what is causing it.

i'm still using my k9a but ever since installed the usb ports would cause this sort of thing, and my warranty ended last july because i've been holding out by a pci usb card with a hub.
 
I have no usb, pci, hdds or anything plugged in

GPU, CPU, PSU
 
should keep the memory in it or it would beep in the pc speaker wont it?

if you was me, i would try unfreezing it with a usb card plugged in.
 
Back
Top