moving raid0 from 1 mobo to another?

t0mmyr

[H]ard|Gawd
Joined
Mar 9, 2000
Messages
1,878
is it possible to move 2 hard drives in a raid 0 setup to a new computer with a completely different motherboard and raid controller without loosing any data?

windows xp ntfs is installed but i will be installing vista onto 2 new drives in the new system, i just want my old raid 0 setup on there so that i can retrieve all my files directly, will it plug and play?
 
I am not for certain having never tried it, but from what I have read here in the past is it prolly will NOT work.

Same series of controller chip, probably.

Same manufacturer but different series, IFFY.

Different manufacturer, not likely.

If you are recycling too many components to have both systems up at the same time, then the best bet is a USB drive. You should prolly have one to backup important info anyway since you run RAID 0.

Don
 
DonDon is right: moving a RAID 0 array from one chipset to another chipset won't work. You're gonna have to back up your data somewhere else.
 
damn, thats what i was trying to do....move the old setup to the new one so that i can drag and drop at sata300 speed..

checking what controllers i have i see that i would be moving the old raid 0 off a Silicon Image Sil3112 sata raid controller...

my new mobo actually has 2 controllers, the ICH10R Intel Matrix Storage which i thought i would try...but upon further specs i see it also has a Silicon Image Sil5723 so maybe i might get some luck plugging them into those 2 ports so long as i plug them in the right order...we'll see i guess
 
damn, thats what i was trying to do....move the old setup to the new one so that i can drag and drop at sata300 speed..

checking what controllers i have i see that i would be moving the old raid 0 off a Silicon Image Sil3112 sata raid controller...

my new mobo actually has 2 controllers, the ICH10R Intel Matrix Storage which i thought i would try...but upon further specs i see it also has a Silicon Image Sil5723 so maybe i might get some luck plugging them into those 2 ports so long as i plug them in the right order...we'll see i guess

that's way too big of a risk just to transfer at sata speeds :) You'd be crazy not to back it up and manually bring the files over to the new computer. The intel 8/9/10R can all use the same raid drivers if I remember correctly, but I don't think that's the case with the SI ones. Even if it did, I still wouldn't even THINK about risking it.
 
well i could try and see if it auto detects....and if not just reconnect them back to my old pc right? i mean i dont think it would write anything to the disks resulting in corruption..........i hope not, i have about 600gb of junk i need to sort through
 
d00d do not even try it if you dont have a backup image...that is just suicide

Honestly new Hardware deserves a new installation...save your data and start over youll save yourself time, headaches, and data loss. I know in theory it would be nice to just move the drives to the new mobo but it just does not work like that.

Save the data and stuff and start over.. believe me I have ran a RAID0 for a long time and even moving just a single drive to a new mobo has problems....just do a clean install, and restore your data from the backup.
 
Piece of cake, done it 3 times myself. NF2 NF7-S to NF2 DFI Infinity to NF4 DFI Infinity, with a pair of 36G raptors.

Buy a PCI SiLImage 3112 sata controller. Plug it into the sytem and load the drivers so the installation knows all about it.

Move the raid drives over to the new controller. The board should see the raid set already configured and Presto.

Now it is is an OS installed on the raid, it gets tougher. You need to move to the Sil, then boot from it, then remove the motherboard drivers, and video card drivers, and them move the setup into the new machine.

Setup the new boards bios to boot from the PCI based board, and it will "hopefully" boot up and ask for all the motherboard and video drivers.

Best of luck.
 
Since it's just a matter of speed, I wouldn't bother. Yes, it'll take longer, yes it'll be a pain... but at least you know you have your data.
 
Back
Top