Motherboard or memory...

RADEoN

Supreme [H]ardness
Joined
Dec 30, 2005
Messages
6,533
I'm having an issue with my X58 Eclipse, where when I turn the computer on, it just freezes right after it detects the amount of memory in the computer, and says 423C on the bottom right hand side.

I've taken out 2 sticks of ram and powered on the computer 10 times, and it started normally 10/10 times, and then I added another and did the same, 10/10 times. But with 3, it freezes and I must turn off and turn back on again to get it to work.

My RAM is OCZ DDR3 1600, and i've tinkered with the timings and voltages to no avail.

any ideas?
 
did you troubleshoot it down to which particular stick it is? or does it do this with any 3 stix? if it is any 3 stix, try manually setting the default timings, and run it at default speed and voltage. see if same thing happens.
 
Also try memory in all the different slots. Might be a bad slot.
 
I already did that.

Vanilla: It does it with 3 sticks only, any variation of 2 sticks it works fine.
 
yeah this is the same exact thing that happened on my friends board.. took 4 RMA's of the p6t deluxe to finally find one that worked correctly..
 
Back
Top