Mobo/RAM hardware issue

Joined
Aug 18, 2010
Messages
5
So I built my system a couple days ago, and everything was running smooth until today when I got multiple BSODs that said something about page fault in nonpaged area. I looked it up, and it seemed to be a RAM hardware issue.

This is my ram: http://www.newegg.com/Product/Produc...-409-_-Product

I ran memtest, and I immediately (before memory coverage even got to 1%) got a slew of errors. Since I have 2 x 2gb sticks I then decided to test them one at a time to determine which was the faulty stick. However, after 100% coverage on each singular stick of ram there were no errors at all.

I ran memtest 4.0, my mobo is here: http://www.newegg.com/Product/Produc...-198-_-Product

Not sure the rest of my system is relevant, but I have an x4 phenom 965, gtx 470, samsung 1tb hd, corsair 650W psu. My temps are fine; nothing is running hot.

I did OC my ram to 1600, as it came as stock 1333 (if you read the reviews almost everyone did, and the ram is labeled as 1600 anyway). I downclocked to 1333 before running memtest, and the problems prevailed.

Is there a problem with dual channeling? Should I try different slots? Or increase the voltage on my RAM? On the newegg specs it says 1.55v - 1.75v, and I think mine are running at 1.65v.

At the moment it's been somewhat possessed I feel; I've been swapping sticks of RAM around after downclocking back to 1333, sometimes there are no errors and my system runs fine... other times there are many errors on memtest and my system BSOD's. For example yesterday I was running 1333 in slots 3+4 and it was fine for the entire evening, but this morning I moved the RAM sticks to slots 1+2 (not sure why; I thought AMD mobos worked better when RAM was in the closer slots), and I got errors in memtest. Moved back to slots 3+4 and computer seems stable at the moment.

I think my RAM sucks? Or is it a problem with the motherboard? All this ram swapping has made me think it's the mobo.

CPU-Z screen: http://yfrog.com/0c30402498p
 
you may have to change brands of ram..it may not be compatable with your board..is the ram listed on the approved list for that board...do you have the latest bios...your link is broken so i dont know what ram you have....you could call tech support for the ram and maybe they will switch it out for compatable ram...corsair did this for me about a year ago....and they made a mistake and sent me 2 sets of replacement ram...when i called and told them i recieved 2 replacement sets they said keep em our mistake, so i ended up with 4 2gig sticks of corsair ram.......
 
Just out of curiosity, if you have time - if you test the single sticks using this program, do they show errors? I haven't used it much, but it's supposed to be more likely to catch errors than mtest86.

Also - try setting timings and voltage manually in BIOS if you haven't already. Sometimes the defaults are wrong.
 
What will increasing the voltage on ram do? I know a lot of the people who reviewed the product on newegg are running at 1.65 or lower..
 
What will increasing the voltage on ram do? I know a lot of the people who reviewed the product on newegg are running at 1.65 or lower..

You may have a particular set that needs 1.75V. In addition, it rules out any voltage issue you may have with the RAM.
 
Well my system's been running fine all day; hopefully it was just an intermittent issue. If this pops up again I guess I will adjust the voltages. Thanks for the reply, and hopefully it's resolved.
 
Morning after: boot computer, memtest fails, BSOD. My RAM apparently doesn't like restarts. -.-

Still confused I guess. Will try upping voltage from 1.65 to 1.70 and see if that does anything.

Seems to be a cold boot error as this has happened for the past 2 days...
 
Last edited:
Back
Top