mITX/mATX gaming rig

Thanks guys, I just order all the parts.

Really interested in seeing how your mATX build turns out since I am looking forward to building one this summer and you are picking many of the parts I have my eye on. I cant wait to see the results!

:) I will post some result and picture.
 
Really interested in seeing how your mATX build turns out since I am looking forward to building one this summer and you are picking many of the parts I have my eye on. I cant wait to see the results!

:eek:

After I have order all the parts, the Asus mITX mb is available on newegg , so i cancel everything and reorder all the parts with the mITX build :p

PCPartPicker part list /
CPU: Intel Core i5-3570K 3.4GHz Quad-Core Processor
CPU Cooler: Corsair H80 92.0 CFM Liquid CPU Cooler
Motherboard: Asus P8Z77-I Deluxe Mini ITX LGA1155 Motherboard
Memory: Samsung 8GB (2 x 4GB) DDR3-1600 Memory
Hard Drive: Crucial M4 128GB 2.5" Solid State Disk
Video Card: Sapphire Radeon HD 6950 2GB Video Card
Case: Silverstone SST-SG08B Mini ITX Desktop Case w/600W Power Supply

I am holding off on the H80, waiting for other who is building a similar rig
 
Hey... that looks similar to what I was considering....

(... but I already have the case/PSU, video card, SSD, and RAM on hand....)
 
Hey... that looks similar to what I was considering....

(... but I already have the case/PSU, video card, SSD, and RAM on hand....)

So you are waiting on the CPU and mb? Looking at your sig and seem like you have a pretty good desktop rig. Going to oc with the new build?
 
I'm leaning towards IB/Z77 as I haven't been 100% confident in my current board. But I haven't decided whether or not I'll overclock my "new" system -- I still haven't found the "ideal" CPU cooler I've been looking for.
 
Thanks Danny and Prav. I finally have my machine built and running. Thank you for all your advance and tips!

$23 Samsung Extreme Low Voltage 4GB (Single) DDR3 1600 (PC3 12800) MV-3V4G3

This is very good ram if you are comfortable tweaking settings. Kits are out of stock but single stick are available, just grab 4.
edit: Also available at TigerDirect $25 ea

My system is oc-ed to 105.8 x 43 @ 1.32v, the memory is 9-9-9-24 at this moment. I am still tweaking it
 
As an Amazon Associate, HardForum may earn from qualifying purchases.
How do you like the TJ08B-E? I'm considering picking one up to replace my Antec 900.

I didn't pick the Tj08B-E at the end, i am using a SG08 and i love it. I would have go to a SG05 even if i know better =)
 
Finally some picture of my build. I redo all the cable today

CPU and cooler:
IMG_4842.JPG


120mm rad push/pull scythe slip stream PWM
IMG_4843.JPG


RAM
IMG_4844.JPG


GPU - 6950. cannot unlock to 6970 :mad:
IMG_4848.JPG


Getting ready to redo the cable
IMG_4846.JPG

IMG_4845.JPG


Few hours later, it is done!
IMG_4850.JPG


All the power cable go into the empty HDD drive bay
IMG_4851.JPG


lots of room with the rad and the fan. I wish I brought the H80/920
IMG_4858.JPG


IMG_4865.JPG


:)
 
Last edited:
Looks great I be right behind you on my build same mobo, but planning on a 3770K, with a GTX 670 in a Lian Li PC-Q18B case..
 
Back
Top