Mining with RTX 3060

[Gekk0r]

Hello to everyone,

What motherboard do you suggest to start mining with 4 ASUS RTX 3060 TUF/STRIX?
I already have an i5 6400T and G3930 or i7 4770k (xD) that I would like to use again...

Thank you in advance

Additional note:
I will extend my rig at least with 2 more GPU.

I failed 3 times to build my rig with the ASRock H110 Pro. All the times problems linked to no boot, no beeps and no signal.
Tested with the following new brand hardware:
i5 6400T and G3930 (perfect cpu pins bent)
DDR4 Corsair 2133 2133 CMV8GX4M1A2133C15
Two different modular PSU (CoolMaster 850W and Corsair 1000W)

Thank you in advance!

 

[Archaea]

If you had three H110 boards seem faulty and you bought them all new the problem is unlikely to be the board.
There is a motherboard mining thread in the crypto forum already.
The H110 is a good board.

The problem with any crypto mining motherboard recommendation right now is they are priced to the moon. I use an Asus B250 mining expert, but it’s crazy expensive right now. I just bought an old supermicro dual Xeon 1366 board off eBay with RAM and processors for dirt cheap. I’ll be expanding to that old platform just because it’ll run 5 or 6 cards and is unreasonably cheap.

https://hardforum.com/threads/new-mb-for-multi-gpu-mining.2006477/

 

[Gekk0r]

The problem with any crypto mining motherboard recommendation right now is they are priced to the moon.

Exactly! It's a shame...

Thank you very much for the answer