Matrox Announces Multiple Graphics eXpansion Module Support

HardOCP News

[H] News
Joined
Dec 31, 1969
Messages
0
Matrox Graphics Inc., the leading manufacturer of specialized graphics solutions, today announced multiple DualHead2Go and TripleHead2Go Graphics eXpansion Module (GXM) support to drive up to four or six monitors, respectively, from a single system. A second GXM can now be connected to the secondary output of a supported dual monitor graphics card so two DualHead2Go GXMs can power up to four outputs in 2x2 or 4x1 modes, while two TripleHead2Go units can be combined to connect six displays to produce either a 3x2 or 6x1 set up.
 
That's fine and dandy but the real question is are their cards strong enough to push a these polygons and screens?
 
thats curious as ive built single desktop systems with 8 of them driving 16 HD projectors in a 4x4 grid.
 
thats curious as ive built single desktop systems with 8 of them driving 16 HD projectors in a 4x4 grid.

Wouldn't it have been cheaper to pick up four MMS450 / QID cards, or easier to pick up a pair of their newer octal cards?
 
the specs let you only do 3x1680x1050 or 2x1920x1200 per TripleHead2Go device.

Yuck.
 
the specs let you only do 3x1680x1050 or 2x1920x1200 per TripleHead2Go device.

Yuck.
That's the maximum bandwidth of a single DVI-Dual link port. The only way to go higher in resolution would be to drop below 60FPS. To get any more you need a displayport 1.2 device (displayport 1.0/1.1 are only marginally faster than a DVI-DL connection).
 
C'mon Matrox, drop this specialist stuff and come back to the game with a great card delivering the best 2D/HD video/colour output anywhere with a modicum of 3D power.

In fact dont worry about the 3D bit too much. The former will do first. Just dont charge us $500 for it though.
 
Back
Top