M.2 SSD Laser Etched/Cut Backplate.

P7T3B

n00b
Joined
Sep 27, 2013
Messages
27
Hello All,
I thought I would post a couple pics of the backplate I'm having made for the M.2 SSD (Samsung 850 EVO) I'm getting for new build, it'll be made from Black Anodized Aluminum. I've had backplates made for my EVGA GTX 660 SC & my Crative X-FI Titanium cards (pics below), they turned out quite well so I figured.. what the heck!? lol This is just my first dsign, I might make a couple more (not sure about my Font choice/design) & see what I can come up with, I kind of like the way this one looks!?

The backplates will be deep laser etched & cut, the graphics will be filled with red ceramic or some other kind of red material!?

I was also thinking.. (that's never good!!) since some of these drive (M.2) have been known to get hot, why not attach a cool looking backplate with a couple thermal pads to help keep it cool!?

Please let me know what you think?

NOTE: This drive will be visible in the case!





Here are the two backplates I had made before.















 
wow...someone likes their aesthetics. I personally could careless and think it is a waste of money but it sure looks nice!
 
I like the idea, a lot, I'm a sucker for that kinda thing... Not crazy about the design tho, maybe too much info/text on it. I think your other two look classier as they have more of a thought out design with the frequency graphic and E pattern.

Why not do it in the same color too? Unless you've got other components in red like the mobo/RAM... An interesting approach might be mimicking the Samsung 2.5" SSD design with the small random square, dunno.
 
Impulse,
Thanks..
The backplates for the GTX 660 and X-Fi were for, and are in my old Z77M build, the new build is going to be red/black (yeah, EVERYONE does red/black themes! lol) with some other unique mods.. should be different than most everything!? I'm not going to go crazy on the mods.. just a couple few little things here and there!

As for the graphics.. yeah, that was just a quick first attempt to see how it would look!? As for the chip graphic, that was actually what I was going for.. the Samsung logo type look! lol

If anyone has design ideas, let me know.. I'm open to suggestions, more/less words/graphics etc!?

Again, Thanks, Phil B.
 
Ohh, hah, I think if you center it top to bottom it might evoke the stock Samsung look some more (just nix the word SSD and/or the M.2 or something). Just a thought, looking forward to the full build!
 
Small update..
My new PSU came in yesterday, it's an EVGA Supernova 650 G1, a few more parts (Corsair Hydro Series H100i GTX, Kingston HyperX Savage 8GB Kit (2x4GB) 1600MHz DDR3, and some Innovation Cooling Diamond "7 Carat" Thermal Compound) are due in Saturday. I'll take a few shots when they get here.

New PSU.





















Here are a few different designs for the M.2 Backplate.. I'm still trying to "create" something I really like.. I think I have designers block!? lol

Anyway, how do these look.. I know it's ultimately up to me (my system and all) but, I would like to know what others think!?

Again.. Thanks, Phil B.

1




2




3




4




5




6


 
I like the first one, has sort of an 80s sci-fi vibe to it, and it's less overloaded with text than the rest.
 
I like the first one, has sort of an 80s sci-fi vibe to it, and it's less overloaded with text than the rest.

makes me think star wars

O would like the last one the most if you dropped the speedometer and put the m.2 logo there like above
 
That might look good, with the M.2 straightened, I actually thought the speedo was a scythe at first glance... :p I do like that M2/dragon logo.
 
Pretty cool, where are you having the etching done?

I'm not sure about the font choice or graphics, but this seems like a perfect opportunity to add a graphic of Victo the 3D V-NAND Powered Robot. I'd bet that Samsung at least gives you a shout-out on Twitter or something for that.
 
Chris_Lonardo,
I'm having the same local company (trophytime . com) I used the last time for the other two backplates I had made. I have yet to order the M.2 drive, I need to test fit the drive into the slot and measure how long it needs to be without interfering with the slot, they have to have it so they can take measurements to make sure it's the proper size/fit etc.

Here are the final three designs I think I'm going to choose from.. what do you think?

1




2




3




Later, Phil B.
 
Not to sound rude or anything, but why are you laser-etching a plate for an 850 EVO? That's like putting a $10 paint job on a Camry. I'd understand if had one of the new Kingston PCI-E based ones... But the whole point of the EVOs is that their price/performance is awesome. spending more money on them is... kinda ruining them.

'Edit: Also, on all of the other backplates you have the actual font and design of the company logo representing the product. The Geforce and Creative logos are present in their design-spec'd fonts and whatnot: Why did you change that process for the Samsung and opt for a generic font?
 
KazeoHin,
I'm having a backplate made and laser etched for two (2) reasons: 1) It's my money.. maybe I budgeted a certain amount to cover all part and mods!?<---NOT! :D 2) Again, It's my build/money.. plus, it will help to somewhat cool the drive and look cool all at the same time! :)

No Samsung Logo.. fixed! Hey, that kind of looks okay after I "tweaked" it a bit! lol Still needs some fine tuning though!?

I know it may seem stupid to some (you) but, I just like to do thing a little different than everyone else.. hence, this build/mod!

This isn't going to be some MAJOR mod or anything, just a couple small unique mods here and there to make the build look nice, that's all.

What does everyone think of this one?

Thanks All, Phil B.



 
Having the word Samsung twice on there just hurts my OCD sensibilities... :p It does look a little redundant, specially as they're so close together.

Any geek knows it's an SSD, and anyone else couldn't care less, I'd probably do away with the whole middle line ('Samsung SSD')... Might look cleaner, dunno.
 
Impulse,
Your right.. it does look "off" with two on it!? lol

How does it look now?

Thanks for the feedback! Phil B.



 
Last edited:
How much do one of these plates cost? The x-fi plate is pretty sick. This revision's my favorite fwiw.
 
If you get these made I would LOVE a few blank ones. Just black.

Please let me know if you can arrange that.
 
Back
Top