LANBOX Lite Micro ATX Case $54.99 AR

berzerker

Gawd
Joined
Jun 16, 2004
Messages
820
This seems like a good deal. I might have been tempted if I hadn't already ordered a Sugo SG02.

According to posters below, this is the VF6000BNS model, with black side panels (no windows).

Online:

LANBOX Lite Micro ATX Case $54.99AR + shipping ($10 for me)

$50 AR at Fry's B&M Dallas (maybe others)

http://shopping.dallasnews.com/ROP/ads.aspx?advid=2519&adid=6322463&subid=21605499&type=



Newegg product page for reference ($79.99 + ship):

http://www.newegg.com/Product/Product.aspx?Item=N82E16811133045
 
I just picked one up at Fry's. Seems like a nice case. A little bigger than I expected. Nice deal, I think... I'm not really worried about it failing... ventilation seems pretty good.

JaYp146, do you know anyone with this case that has had any issue?
 
It's a nice looking case, but the design seems flawed to me.

From the pics on newegg.com, it looks like they waste a ton of space particularly around the drive cages and that area over the slots. Compare that to some of the sfx designs like Shuttle which is extremely efficient about space (and airflow). This has the same volume as a small mid-tower.

Plus, they've got ventilation holes all over the place; in a good case design, you're pulling air across the drives, mobo, and out the back -- dell is a particularly good example, the way they snake the air through the case. In this design, the exhaust fans are pulling air from everywhere, including the ventilation holes right next to them. Moreover, the PSU fan will probably be right above (even overlapping) the 2 60mm fans, which won't be that helpful.

What they should have done is made the case about 1.5" shorter, added two side-by-side HD mountings at the bottom in the front, a cage for both an external 3.5" floppy and internal HD, had one 80mm exhaust fan over the slots venting upwards. In my opinion, anyway...
 
The psu can be installed upside down so that it pulls air from the top and blows it out the back.
 
For those that own this case, does it seem feasible (room wise) to mount a 120mm fan on one of the side windows?
 
Possible, but maybe a 92mm fan would probably fit better....I just got it last night so I would have to look at it again to be certian, I was thinking the same thing myself, just wasn't sure if it would disrupte the airflow through the case.
 
anyone get this case? i wanted it and the ad says clear side windows, but the ad pictured shows the case has metal windows. so which is it?
 
i have the one with the clear sides here is my thread of the year with a picture of my set up with the case. Note how it is really convinent for me my desk is so small but i can fit my case and sub on it. i went from a thermaltake armor haha but i had a bigger desk. the only thing that sucks is i cant go sli and its a real good time to sli right now cards are on the cheap side. pg 3 post 44

http://www.hardforum.com/showthread.php?t=1252397&page=3
 
There are two models VF6000BNS (standard) and VF6000BWS (windowed)... The ones I saw and purchased at Fry's are the BNS model and do not have Windows. The rebate form I have is only for the BNS, however there maybe a different form for the BWS model. I didnt see the BWS model at the Plano, TX Fry's but I really didnt look around because I don't need the windoweded version, but it seems that some stores have one, or the other or both, so you just have to check it out. Can anyone confirm a rebate form for the BWS model?
 
A buddy of mine got me one while visiting Fry's today (Houston, TX at Southwest Fwy/59). All they had was the BNS (non-windowed) model. Price was $75-$25 MIR.
 
Stick in the 9600GT - excellent performance with much lower temps than the 8800's. Very nice case, and nice deal. Thanks, OP .... stop tempting me to build my lanbox... I can't afford it yet!!! :eek:
 
Back
Top