KT-7 Install Problems from a Retard

Egg242

Limp Gawd
Joined
Sep 24, 2003
Messages
384
I just got a KT7 mobo and a black CompUSA case. It included a bag of metal stand offs. When I use the standoffs, the board sits too high and the ports on the back of the machine do not line up correctly. Is it safe to not use standoffs?
 
I tried that once a while ago, and since the tray is metal, it'll short the motherboard based on my experiences.
 
Anyone? Is their a piece that is not as tall? Something I can use as a buffer against the chassis and maindoard? Screws that dont conduct electricity? Anything?
 
in the old days , we used nylon standoffs:rolleyes:
find an old p2 unit and gut it for the standoffs


use your noodle :p
 
The standoffs that come with a case should work for that case. Either it came with the wrong thing (Doubtfull) or your doing something incorrect.

If you use the right parts everything will line up. Of this I am certain. If you have pics of the stuff that would eliminate all doubt.
 
linesup.gif

linesup2.gif

MoboMount.gif

mobomountback.gif

raisedlineup.gif

results.gif


If im correct the mobo standoffs go underneath the mobo and the screw goes in the mobo hole and screws into the stand off, correct?
 
When I was installing my KT7-A in my cheap ass case, I had to put the board in at an angle to get the ports on the board to line up with the holes in the case. After I get them in the holes, I lowered the front of the board down on the tray and put the screws in.

If you try this, keep an eye on the ports and be gentle. Don't force it, and if it starts to make you uneasy, stop.
 
The convex standoffs that you're threading the brass standoffs into look like the type that you can direct mount to (don't need the brass standoffs), provided the traces on the underside of the board don't short on the metal of the standoff.

Some of the Evercases that they used to sell at newegg did the same thing - you had to mount directly to the "bubble" mounts.
 
Thank you very much TerryG, it worked perfectly. Mobo looks a little sideways, but you cant notice unless you look hard for it :D. Works now, just waiting on ram and I will have completed my first build.
 
Back
Top