is7e 2 problems

Chris_B

Supreme [H]ardness
Joined
May 29, 2001
Messages
5,501
Took delivery of an abit is7e-2 yesterday and have had nothing but trouble. First off anytime i started up the pc i would get the following:

realtek rtc8139(x)/8130/810x boot agent……

realtek rtc8139(x)/8130/810x boot agent……

realtek rtc8139(x)/8130/810x boot agent……

realtek rtc8139(x)/8130/810x boot agent……

realtek rtc8139(x)/8130/810x boot agent……

realtek rtc8139(x)/8130/810x boot agent……


That would happen on boot and just sit there despite the fact i had cd rom enabled to boot the windows xp disc. After checking on the net i found something telling me to hit shift and f10 so i could set the pc to boot from the devices specified in the bios. So windows xp boots and starts to install i think everythings ok.

The installation just refuses to complete, It'll get to "installing devices" and take about a half hour to get through that, then it gets to "installing network" gets to the end of the progress bar and just sits there. I left the pc sitting for over 2 hours yesterday just to see if it would get past this and it just stayed on that part of the install. The little indicator blocks at the right of the screen are still in motion as are the messages of windows xp does this or that faster etc. It just refuses to go any further than this.

Ive tried different cpu's (two 2.8ghz p4's and a 3.2), different ram, different hard drive and still the same result, i formatted both hard drives probably 12+ times yesterday, set a new world record for times clearing the cmos in one day and this problem still persists. I was working at this pc for over 12 hours yesterday and can't figure out what the problem would be.

Tried calling abit tech support yesterday..predictably noone answered, tried today same thing, sent an email to abit tech support yesterday, same thing.


Took some pics of some of the settings, maybe someone can spot something wrong,

http://homepage.ntlworld.com/gerald.marley/pc/irq1.jpg
http://homepage.ntlworld.com/gerald.marley/pc/irq2.jpg
http://homepage.ntlworld.com/gerald.marley/pc/irq3.jpg
http://homepage.ntlworld.com/gerald.marley/pc/irq4.jpg
http://homepage.ntlworld.com/gerald.marley/pc/irq5.jpg


This is what i see just before the pc will boot from cd, doesn't look right to me

http://homepage.ntlworld.com/gerald.marley/pc/bootup.jpg

This is it trying to install windows, again stalls here takes half an hour to get through this and will just sit and do nothing when network is installing

http://homepage.ntlworld.com/gerald.marley/pc/winsetup.jpg


This is the shift+f10 bios screen for the lan settings,
http://homepage.ntlworld.com/gerald.marley/pc/network.jpg

Actually nothing in the manual about this at all so im not sure of the settings.


I tried reinstalling windows again and noted with my cable modem connected to the pc it displayed the realtek messgae maybe once then tried to boot from cd. :confused:
 
It''s set to boot off LAN.
GO into your bios. Go to boot order, remove LAN from any boot sequence.
just for fun, disable the onboard lan controller for installation.
Why are you taking pictures of your IRQ setting?
 
Even with the lan controller disabled the windows install will still basically stop at a certain point. :(
 
It's still trying to boot off the LAN. It will try even if there is no available (disabled) LAN card. Make sure LAN is not a boot option in the boot sequence. Also disable the "boot from other device' option. Sounds liek a HD problem and the board is trying to find something good to work off of.
 
kinda wierd. would you mind taking some screenies of your first 5 bios pages?
 
OK, the Is7-E is super picky about pin settings on HDs even when they are the same model.
My first advice is to connect only one CDRom and only one HD to install everything with. Add the others after.
It seems that all networking crap is disabled, so remove any perphrial cards you may have (besides video) to rule out everything.
If it still fails, RMA. I've built about 30 machines on the is7-e and have never had problems besides the (seemingly random) pickiness of pin configs on harddrives.
 
Ok ill try that tomorrow, been fighting with this thing for 12 hours constant so i need a break before i go insane.
 
Yeah this thing has to be hosed, messed around with it for another few hours today and still nothing. Think ill give an asus board a shot.
 
Back
Top