Is Antec 430 Watt PSU enough?

asuh

Limp Gawd
Joined
Jan 14, 2004
Messages
316
I'm using an old Antec True430 from a few years ago. I just recently upgraded most components of my computer and want to make sure I am not suffering on any performance. The main things I notice is when hooking up several hard drives things seem a little screwy at times. Occasionally my system will freeze up for about 30 seconds as well.

Intel C2D E8500
Asus P5B Deluxe
4GB DDR2 PC6400 (1GBx2 + 2GB chips)
1TB Hitachi
160GB Seagate
XFX 8800GS
DVDRW drive
Netgear USB 802.11N

Is the 430W powerful enough for this or am I kinda pushing the limit? Thanks
 
that should be enough
i have something similar and i have to plug a molex into the mobo for sli so its good
 
Keep in mind, though, that a PSU will age and not be able to supply as much power the older it gets. A lot of people generally buy a PSU capable of 50% to 100% more than what their system actually draws, just to be safe, and to accomodate for future upgrades. Honestly, I'd probably want a 500-550W PSU ideally for you, but it shouldn't really matter.
 
Thanks for all the great info. I'll monitor my computer to make sure nothing too screwy happens or to make sure the PSU continues to function properly. If I do upgrade, I'll keep the 500W number in mind.
 
Try a different PSU and see if the issues go away. Age + the relatively low quality of that PSU mitigates the already low 26A on the +12V rail.
 
I've got an Antec TruePower 430W from late 2003 that's been running near 24/7 the last 6 years. However, it only has 20A available on the 12V rail instead of the 26A quoted here. An 8800GS is rated at max 105W and the E8500 is rated at 65W. These are TDP numbers, generally for worst case scenarios. Combined with a few hard drives and factoring in losses in regulation, this could easily be near its current limit.

However, inadequate power would generally manifest as more serious issues than simply freezing for 30 seconds before returning to normal. Trying a newer PSU as others have recommended is a good idea, and in the mean time, avoid overclocking or adding additional hard drives.

Newer power supplies in the 400W range are much better suited to handling modern power loads that are heavy on the 12V rail. For example, the Antec EarthWatts 430W model boasts a 32A current limit which would be more than enough for your needs.
 
Yea, I had an original Antec True Power 430 and it could'nt handle an 8800GT, got Corsair's low end 400W (30A 12 Rail) for $30 shipped after rebates and it runs great.
 
Is there software that will accurately measure this PSU? Now I'm curious to know if I'm okay.

I'm currently not OCing and don't plan to right now. Maybe next year but obviously not before I know what my PSU can handle.
 
You could try running SpeedFan or a similar monitoring program to see what your reported 12V line voltage is. A value too high and especially too low may signal that you're drawing too much power. A value dropping more than 5%, in this case 11.4V, signifies a serious problem. You'll need to use chart functionality in the monitoring program of your choice to see how your voltage changes over time. Then try running a game or other high demand application to see if you remain in spec.

http://www.almico.com/speedfan.php

There's a chance that monitoring software won't be able to read various voltages correctly, giving obviously erroneous numbers. Also, it's pretty unlikely you'll uncover anything wrong, since a large voltage drop would probably manifest as randomly timed reboots or unresponsive blank screens during heavy use.
 
That PSU should be decent, but you spend under $70 for a better psu. I agree with what other people are saying. The older the psu, the less reliable the psu generally is.
 
Is there software that will accurately measure this PSU? Now I'm curious to know if I'm okay.

Nope, not a single software in the world, not even the BIOs, can accurately or even remotely accurately measure PSU voltages. You need to use a Digital Multi-meter to get any sort of accurate voltage measurements:
DMM
 
I post a similar thread and got the A-OK for an Antec 380 earthwatt for:

-e8400
-p5q pro
-2x4GB ddr2-800
-500GB hdd
-8800GT
-dvd burner

Gotta love them earthwatts.
 
I have that PSU and a quite similar build (see my sig), and its more than enough. Great quiet PSU too!
 
Back
Top