Intel: Two Ports Are Better Than One

HardOCP News

[H] News
Joined
Dec 31, 1969
Messages
0
Intel has launched the industry's first 10GBase-T server adapter to support SR-IOV for advanced network virtualization. This adapter's energy-efficient design allows it to support two 10GbE ports. Why two ports? 1) Two ports provide redundancy - one takes over if the other fails, and 2) ports can be combined into one bigger virtual pipe, providing 20GbE of networking bandwidth. Based on the Intel® 82599 10 Gigabit Ethernet Controller, the Intel® Ethernet Server Adapter X520-T2 supports connectivity over distances of up to 100 meters and includes enhancements for I/O virtualization and iSCSI. Learn more about the X520-T2.
 
When will this make sense to have in a home environment...? :D

I love having gigabit at the house now, I just can't imagine 10 or 20x the bandwidth...haha.
 
I'll wait until I don't have to take out a loan to buy one. I assume they are going to be very expensive.
 
When will this make sense to have in a home environment...? :D

I love having gigabit at the house now, I just can't imagine 10 or 20x the bandwidth...haha.

As is you are maxing out the bandwidth on SATA2 and your HDD's read/write speeds so unless you have a Raid0 with a ton of drives you don't need it.
 
As is you are maxing out the bandwidth on SATA2 and your HDD's read/write speeds so unless you have a Raid0 with a ton of drives you don't need it.

By tonne he means a large NAS drive array. Something along these lines:

emc_clariion_cx500.jpg
 
I max out the speed on my home server all the time moving files. But it rarely happens, i don't think 10 gig will be mainstream for the home user for quite a while. We can always just buy a couple gig cards and team them together if we need faster speeds, mainly the server is just going to need it.

Interested in the cost of one of these adapters though.
 
When will this make sense to have in a home environment...? :D

I love having gigabit at the house now, I just can't imagine 10 or 20x the bandwidth...haha.
as soon as it becomes affordable. GigaBit Ethernet is only 125MB(ytes)/sec. The fastest mechanical drives can saturate that, and currrent SSDs are throttled to about 50%. A two drive SATA6GB raid will potentially be able to saturate a 10GB ethernet line.
 
GigaBit Ethernet is only 125MB(ytes)/sec.

Not even. Once you include all the various overhead it's in the range of 10bits of throughput for every 8bits of data. The best you're going to see from a gigabit connection is about 100MB/s
 
Back
Top