im back and ready to build

4LC4PON3

DERP!
Joined
Jan 18, 2005
Messages
4,230
well since crysis is out now i have now come bac and im ready to buil.d i had to take a break for awhile you know how it gets sometimes but during that break i have lost touch with new hardware.

im ready to build for crysis and need to know whats the best. mobo, proccessor, ram, video card and so on.

not sure if i should go intel or amd so maybe you can tell me this also. ive always been with ati and amd since ati has always looked realistic and nvidia has to me been to cartoony. well let me know what you all think. i want to spend anywhere between 0 and 6000 so let me know. thanks
 
At least give us a bit more info.

- What's your actual budget?
- What parts do you need for that budget?
- What size monitor do you have or plan on getting? I.E What's the max resolution of your monitor?
- Will you be overclocking?
- What else besides gaming will you be doing with this PC?

And to answer your questions: Intel hands down. And Nvidia hands down. ATI's current crop of cards don't perform well when compared to Nvidia's offerings.

Also, there is no current system yet that can play Crysis at full max settings at 1900 x 1200 FYI. From what I've read so far, and played so far, Crysis is one mean mofo when it comes to system requirements. But then again it depends on what resolution you're playing at.
 
- What's your actual budget? 0 - 6000 dollars is my budget
- What parts do you need for that budget? this is a complete build
- What size monitor do you have or plan on getting? I.E What's the max resolution of your monitor? i dont know i have not researched this yet.
- Will you be overclocking? yes
- What else besides gaming will you be doing with this PC? i download alot of music and movies and i idle mIRC.

on the monitor half i dont know cause i dont know what is the best out there. would like at least a 20 - 22inch lcd or if there is something better let me know. i want the highest res monitor money can buy.

im thinking that maybe i should wait if what your saying is correct that no pc can run crysis on high settings yet.i was hoping to build top notch just to run this on high settings.
 
- What parts do you need for that budget? this is a complete build

That doesn't help. Because a complete build can mean anything depending on the needs of the person like: CPU, motherboard, RAM, hard drive, DVD burner, PSU, RAID Card, case, water cooling setup, HSF, card reader, cathode lights, mouse, keyboard, speakers, sound card, fans, external hard drives, head phones, OS, etc.

So again, what parts do you need for that budget?

on the monitor half i dont know cause i dont know what is the best out there. would like at least a 20 - 22inch lcd or if there is something better let me know. i want the highest res monitor money can buy.

Highest res I think is 2560x1600 right now. So basically a 30" monitor.

im thinking that maybe i should wait if what your saying is correct that no pc can run crysis on high settings yet.i was hoping to build top notch just to run this on high settings.

Yes I agree. Considering that current systems even with 8800Ultra SLI can barely play Crysis at 1920x1200 at Max settings let alone 2560x1600, wait a while.
 
no i like to build from scratch. plus i think that alienware, dell and them are rip offs charging way overbored for something i can get for half the price. lets say its 5 grand for a complete pc with them im sure i can build it for 2500 or abit higher.

ok since your going to be picky on this. i will choose everything else. what is the best intel mobo and cpu right now and maybe you can tell me the best ram to get. as well.

thanks
 
Well actually best is kind of subjective when it comes to mobos. It depends on what features a person wants in their mobo. So is there any particular features that you want in a mobo? RAID, SLI, Firewire, etc.

CPU wise, the Q6600 is probably the best for you since the Crysis developers have recommended that you should get a quad core:
http://www.shacknews.com/featuredarticle.x?id=639

Cevat Yerli: We support both 64-bit and multi-cores. Multi-core will be beneficial in the experience, particularly in faster but also smoother framerates. 64-bit and higher memory will yield quicker loading times. We recommend quad core over higher clock

And since you're overclocking, get a G0 stepping Q6600. Compared to the B3 stepping, commonly found at newegg, the G0 stepping runs cooler and therefore can OC higher. ClubIT guarantees G0 stepping:
Intel Core 2 Quad Q6600 G0 Stepping CPU - $272

And since we're on the subject of developer recommendations, get Vista64bit as your main OS if you want DX10 graphics and the ability to use 4GB of RAM.

As for RAM, anything with Micro D9 ICs is good choice. Right now, this set of Ballistix RAM. which has Micron D9 ICs, is the best IMO in terms of price and overclock ability:
Crucial Ballistix BL2KIT12864AA804 2 x 1GB DDR2 800 RAM - $98

However if you do go with the Q6600, you do NOT need any RAM that comes with Micron D9 chips because the Q6600 can't OC to the point where you need to OC the RAM. Also, C2D systems benefit the most from having the FSB:RAM at a 1:1 ratio. Here's what I'm getting at:

Q6600:
Multi x FSB, RAM Speed = Clock Speed
9 x 266Mhz, DDR2 533 RAM = 2.4Ghz <== Stock Speeds
9 x 333Mhz, DDR2 667 RAM = 3.0Ghz <== Good OC
9 x 400Mhz, DDR2 800 RAM = 3.6Ghz <== Excellent OC

E6750:
Multi x FSB, RAM Speed = Clock Speed
8 × 333 = 2.6Ghz, DDR2-667 << Stock speeds
8 × 400 = 3.2Ghz, DDR2-800 << Easy OC
8 × 450 = 3.6Ghz, DDR2-900 << Good OC
8 × 500 = 4.0Ghz, DDR2-1000 << Great OC

As you can see, all you need to OC the Q6600 to its max OC is DDR2 800 RAM, no need to OC the RAM at all. Whereas with the E6750, you will need the Ballistix if you go higher than 3.2Ghz.

And since Crysis will most likely need it, go for 4GB of DDR2 800 RAM:
G.SKILL F2-6400CL5D-4GBPQ 2 x 2GB DDR2 800 RAM - $170

Or if you think you can push the Q6600 past 3.6Ghz, then definitely get two of the Ballistix RAM I linked to earlier to get 4GB of RAM.

Now with the Q6600, you're gonna need a very very good HSF to keep it cool, especially if you're overclocking. I recommend this HSF:
Thermalright Ultra-120 Extreme HSF - $55 & Scythe S-Flex SFF21E 120MM Case Fan - $14

Though since you're spending $6000, you might want to think about a water cooling setup. I'm not too knowledgeable about that and so you may want to do your own research.

And while I'm on a roll, I'm going to suggest a few more things. For example, the PSU. Now, due to your budget and possible hardware, I recommend getting this PSU since it should have plenty of power for your needs and of course, you can afford it:
PC Power & Cooling Silencer 750 Quad - $180

As for hard drives, Western Digital Raptors are still the fastest single drive around. However, a more cost effective solution would be two Seagate 7200.10 320GB hard drives in RAID0 since A) it provides more performance than a single Raptor, B) Costs a bit less than a single Raptor, and C) It gives you 640GB of hard drive space. However with a RAID0 setup, you now have three points of failure: the RAID controller and the two hard drives. If any of those fail, there goes your setup.

And FYI, I was not being picky. I was merely pointing out that you did not provide us a list of what parts you need.
 
lol 6k

u wanna wait or right now?

get the nice sli setup :p

2x8800ultra ( or wait for new-gen GFX and sli them )

4x2gigs sticks crucical ballixtic tracer 1066mhz( or 2x2 gigs sticks)

680i? or 690i mobo ( y not intel?= cause money is not a problem for u)
but if you want intel a p35 board is nice mabey get the most expenive asus board you can find or the Abit ip35 PRO
or you can wait it out and get a x38 board

1000+W psu (have to research ere) thermaltake mabey?

QX6850 cpu. but your gonna OC so a q6600 G0 would OC nicely

case?? well anything you reakon is sexy
go around the case modding forum and see which ones u like and pic it ;p
zalman cases are nice but dunno how good they are
p190 is sexy
p182se is also very sexy

LCD screen? get a nice 30inch . mabey 2 of them . or 1 30inch and 3 22inch . or 2 22inchs if u don't have enough space.
brands? i heard westinghouse is good for 30inches
but u jsut go look in the monitor forum

mouse and keyboard?
really your choice . you really have to use them and see how to work for u to really rate them on how good they are. but most people buy logitect

hd? optical drive? card reader?
buy a raptor hd for OS and what eva money can buy u for the rest

sound?
well you can go anywhere from here.
so a start is one of the logitech 7.1 systems are always nice

cooling?
water cooling is nice but if u cbf then air coolin is nice
thermalright 120 extrem with s-flex is nice
or a tunic tower is also nice

Lighting?
really if your a big boy and mature lights aren't really kool.
but if u jsut need 1 or 2 lights in there to see stuff then its ok
but u would need to get clear side case (or make your own :p)

have fun :p
 
no i like to build from scratch. plus i think that alienware, dell and them are rip offs charging way overbored for something i can get for half the price. lets say its 5 grand for a complete pc with them im sure i can build it for 2500 or abit higher.
It was basically sarcasm, since your budget sounded sarcastic. With a $6k budget, you shouldn't be concerned about how overpriced alienware is, lol. :p

If you want to spend all that money, don't forget a killer NIC, a PhysX card, DDR3 RAM, an Extreme Edition CPU, and a Silverstone TJ-10 case along with a Vapochill and some nice custom watercooling parts.

If you'd rather not spend all that money, listen to Danny or read some of our other posts, hehe. $2.5k for the rig alone is about the limit before the point of diminishing returns, as Danny usually points out. To spend that money wisely, read Danny's post and get a nice monitor setup... like dual 30 inchers, lol. Hell, go triple, they're only 1300 each -- it'll still leave enough for a 2k rig, lol. I'll add more when I re-read Danny's post and figure out if he left anything out.

But to answer your question in short: Q6600 G0, Asus P5K-E, Abit IP35, eVGA NF68-A1 or NF67-T1, 4GB G.Skill PQ 2x2GB -- those will give you the best bang for your buck. Oh, and don't forget the TR Ultra120 Extreme and S-Flex fan.
 
i am going to wait for the new video cards. here is my ? and thanks for all the links. I've build many many rigs in the past and I'm not new to the whole PC scene. before i left i saw a couple of comps running 4 video cards at once. now is that still possible and wouldn't 4 cards run crysis with ease?

i don't mind 1 monitor but there is no need for 2 or even 3. right now I am running a 32" sharp Aquos LCD 1080p (1920 x 1080) 10,000:1. on m xbox 360 elite using hdmi and thats good enough for me.

yeah most people don't say i want to spend 6 grand on a new PC recommend me something. so i can get where you would think it was all sarcastic with my funds
 
here is my ? and thanks for all the links. I've build many many rigs in the past and I'm not new to the whole PC scene. before i left i saw a couple of comps running 4 video cards at once. now is that still possible and wouldn't 4 cards run crysis with ease?

i don't mind 1 monitor but there is no need for 2 or even 3. right now I am running a 32" sharp Aquos LCD 1080p (1920 x 1080) 10,000:1. on m xbox 360 elite using hdmi and thats good enough for me.

yeah most people don't say i want to spend 6 grand on a new PC recommend me something. so i can get where you would think it was all sarcastic with my funds.
-------------------------------------------

as for crysis if you say what is true then i don't get this part read below

(Shack: Do you worry it will be too demanding for most gamers' machines?

Cevat Yerli: We are not really concerned. Its not more demanding than Far Cry was and Far Cry was a big success for us. Crysis is just more optimized and looks better at the same demands of Far Cry relative to the past. We scaled back to 3 years old gamer configurations, just as we promised.)

Just remember, nobody was gaming on 24 or 30 inch monitors back then. So, I'm guessing (too lazy to look it up) you'll be fine at lower resolutions... just not at the highest end.

32" 1080p eh? How much did that run you? I have the Westy 37", but its too big for my desk :( I was considering a 30 incher... or 27" Dell. I can't decide if I want 4MP or 2MP, lol. It would take a hell of a graphics card to game on 4MP (2560x1600).
 
i paid $$1349.99 for the tv at circuit city. it has this feature called the Vyper Drive Game Mode built in
 
i paid $$1349.99 for the tv at circuit city. it has this feature called the Vyper Drive Game Mode built in

Hm... seeing as how my Westy was only $800, I guess I'll stick with it, lol. If I were to spend $1300+, it would have to be for more pixels... 2560x1600, since I don't game nearly as much as I used to. Thanks for the info... looking into Vyper Drive Game Mode right now.
 
before i left i saw a couple of comps running 4 video cards at once. now is that still possible and wouldn't 4 cards run crysis with ease?

Yeah some mobos do support 4 video cards at once. However, those 4 cards are not for gaming though, it's for multi-monitor setups. You can't use all four video cards at once for gaming, for now anyway.

There was something called QuadSLI, which was only possible with 7900GX2 or 7950GX2 video cards. Those cards were basically two video cards fused together. So two 7950GX2 in SLI would equal to four cards in SLI or Quad SLI. However, Quad SLI is outdated considering that a single 8800Ultra can perform about the same or better than a QuadSLI setup. Here's some more info.
http://en.wikipedia.org/wiki/Scalable_Link_Interface#Quad_SLI

So to answer your question, not really possible and no idea.
 
Back
Top