• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

i7 920 @ 4GHz, vcore question

Rizen

Rizen

[H]F Junkie
2FA
Joined
Jul 16, 2000
Messages
9,509
I've finally managed to my i7 920 to 4GHz. However, it takes around 1.41vcore on load to ensure stability. It's a C0/C1 stepping, so not quite as friendly as a D0.

However, I want to make sure that this is not too much vcore. VTT is at 1.37, DRAM is at 1.65v.

Temps are mid 73-78C across the cores on Prime95 Blend mode on a TRUE Extreme 1366.

Thoughts?
 
Rizen said:
I've finally managed to my i7 920 to 4GHz. However, it takes around 1.41vcore on load to ensure stability. It's a C0/C1 stepping, so not quite as friendly as a D0.

However, I want to make sure that this is not too much vcore. VTT is at 1.37, DRAM is at 1.65v.

Temps are mid 73-78C across the cores on Prime95 Blend mode on a TRUE Extreme 1366.

Thoughts?
Click to expand...

That sounds about right for the C0 at that speed - 78 full load? Try Linx - that sounds really low to be under full load at that voltage.
 
You must log in or register to reply here.
Back
Top