i need your help! :)

C

(cf)Eclipse

Freelance Overclocker
Joined
Feb 18, 2003
Messages
30,027
i've been trying to figure some things out.. some recent posts from s7e9h3n and FCG over at XS have sorta confirmed some of my suspicions about the stepping:
http://www.xtremesystems.org/forums/showthread.php?t=87144
http://www.xtremesystems.org/forums/showthread.php?t=87182

but as you read towards the 3rd page of the 2nd thread, i begin to question if the stepping is really all there is to it. this is where you guys come in. since it seems to be common fashion with everyone and their kid brother to blur out the 3rd line, the line i believe holds the key to what i'm looking for, it makes it very hard to find anything useful. this is where i'm gonna ask you guys to post two things:


1. the all three lines of the OPN
2. max stable speed and volts, along with temps under load at given settings


if you're not comfortable posting the entire opn here for whatever reason, PM it to me, and i promise nobody will see it but me.

i'll start it off:


--------------------------------------

ADA3200AEP5AR
CAABC 0420TPMW
9818415F40248

2.4ghz with 1.7v
load temps ~45c

--------------------------------------

ADA3200DAA4BW
LBBWE 0551BPPW
Z868317L51449

2.4ghz with 1.65v :rolleyes:
load temps = 37c

--------------------------------------

OSA144DAA5BN
CABNE 0530APMW
1289809H50124

2.8ghz with 1.6v
load temps = 46c

--------------------------------------

OSA146DAA5BN
CABNE 0530APMW
1288864G50001

3.05ghz with 1.56v
load temps = 38c
 
damn it....i only recently covered my entire Opteron 165 CPU with arctic silver 5 goop, without taking the last line.....sorry

EDIT: i read the other forum thread, and people only gave the first two lines, and it seemed helpful

so here it is,

OSA165DAA6CD
CCBWE 0546 MPMW
 
arman01 said:
EDIT: i read the other forum thread, and people only gave the first two lines, and it seemed helpful
Click to expand...
but if you read what i ask, this is useless without the 3rd line

bump so that people see this again. one post is pathetic :(
 
Here's some info on that "bastard child" 3400+ I have:

ADA3400DAA4BZ
LBBLE 0527GPMW
Q338604G54064

2.47 Ghz with 1.44v (225 Mhz x 11)
load temps ~35c
(XP-90 w/ zalman 92mm)

It will run at 2.5 Ghz, but with the mobo I have (ASRock 939 DUAL) with and AGP card, the AGP clock gets a tad too far out of spec since it's tied into the HT - works great at 225, at 230 the AGP has issues. The PCI-e locks in at 100 (or you can let it float as you tweak). I have yet to mess with the vCore at all - when I move to a PCI-e vid card I'll be able to see what this chip will do. Been fun so far.

Peace,
Tim


 
Eclipse, I have a x2 3800+ coming in a day or two. And a few days after that the last parts of my WC will be here so I will be able to see the top of my current x2 3800. I will give you information on both of them soon.
 
somecallmeTim said:
Q338604G5
Click to expand...
intereresting.. thanks :D

dan, i'm pretty sure just about every opteron and FX starts with a 1.. i don't think it's a coincidence ;)
 
(cf)Eclipse said:
dan, i'm pretty sure just about every opteron and FX starts with a 1.. i don't think it's a coincidence ;)
Click to expand...
Did I miss something?

Once I get water or a Zalman my overclock should be much higher, hopefully 2.9ghz~
 
Borgschulze said:
Here you go.

45c Load.
Click to expand...

That's a nice looking dfi board......love the naked ram too :p

I'll have to dig up my notepad with all my cpu/oc stuff on it. Pretty sure I wrote down the 3rd line on my 3000+'s unless you're just looking for optys.
 
SpoogeMonkey said:
Pretty sure I wrote down the 3rd line on my 3000+'s unless you're just looking for optys.
Click to expand...
need alll cpu's.. everything that's been overclocked will help :D

Borgschulze said:
Did I miss something?
Click to expand...
look at the first character of the 3rd line :)
 
SpoogeMonkey said:
That's a nice looking dfi board......love the naked ram too :p
Click to expand...

Hehe, Thanks it really is sexy.

(cf)Eclipse said:
look at the first character of the 3rd line :)
Click to expand...

I thought you said that because I made some dumb mistake like usual... but yes, every Opteron I recall had a 1 there.

Yesterday my friend brang his RAM over, 2x512mb Samsung TCCC, it runs fine at DDR400 1T with both of our RAM, I just have to manually set it, but... this board won't boot with just 1 stick in the closest orange slot to the CPU... it took me about 20 minutes to figure this out. It insisted I use 2 sticks of RAM... needless to say, Battlefield 2 runs so much better with 2GB RAM.
 
if it helps my 4200+x2 reads


ADA4200DAA5BV
LDBHE 0541SPBW
Z822237J51130


and shes currently at 2409mhz at stock voltage :)
 
not too bad :D

it seems that the 3rd line matters, but it determines how it does within that specific stepping. i'm gonna need a whole lot more results to finally figure out what's going on

also, i've noticed something in all my days of data collecting. why on earth can't so many people follow simple instructions? :p :D
 
(cf)Eclipse said:
...

it seems that the 3rd line matters, but it determines how it does within that specific stepping. i'm gonna need a whole lot more results to finally figure out what's going on

also, i've noticed something in all my days of data collecting. why on earth can't so many people follow simple instructions? :p :D
Click to expand...

hehe... you've never worked support have you ;)

Anyway.. yes, my third line starts with a Q... told you it was a bastard child A64. I've manged to get it to post at 250, but the video crashes out when windows loads. I do have the wife conviced to use some tax refund for some upgrades - so I should be going PCI-e for the vide "soon". Wish I could lock the PCI clock on th is board :(

Peace,
Tim
 
nope, and i honestly don't plan on it. if i work support, it'll be forum based ;)

try a padlock on the pci bus? :cool: </lame joke>
 
OSA144DAA5BN
CABNE 0530APMW
1289809H50172

3.15GHz prime stable with 1.56v (1.52v reported) with low enough temps, 3.1GHz to be more positive. ;)

Full Folding Ahead!

 
(cf)Eclipse said:
same as my other 144, thanks tsue :D
Click to expand...

Yes, but the taller box of my OpterOWN deemed itself the mightier of the two. :cool:

Full Folding Ahead!

 
tsuehpsyde said:
Yes, but the taller box of my OpterOWN deemed itself the mightier of the two. :cool:
Click to expand...
hahaha, vandi said it was actually just how it was sitting.. my box was really the taller of the two, but the one baron got appeared taller cause there was something under it iirc


anyway, back on topic. keep posting the numbers! i haven't gotten anywhere near close to making any conclusions ;)
 

ADA3200DAA4BW
LBBWE 0526APIW
Z722366G50794

2.4GHz @ 1.425v
45C load

I'm actually curious to know what would happen if these serial numbers fell into the wrong hands, but don't use me as an example though ;) .
 
N_Raged said:
I'm actually curious to know what would happen if these serial numbers fell into the wrong hands, but don't use me as an example though ;) .
Click to expand...
nothing, but even so, for the paranoid, that's why i mentioned that you can just pm me :D

that's a nice E6 btw, mine needed like 1.7v to hit 2.4ghz :(
 

1. the all three lines of the OPN

ADA3000DAA4BW
LBBWE 0528 UPBW
Q380066G50975

2. max stable speed and volts, along with temps under load at given settings

Up at 2.4Ghz, 1.475V. Temp at load = 46C.
 
Opty 165 CCBWE 0547TPMW
Prime Stable @ 2.8 (312x9) with a 1.504Vcore
Memory @ 3-4-3-6 280 on a 9/10 divider, Maxes at 306, might be board/mem controller related tho
Idle temps 30c Full load temps 40c

I'll get the other strings when i can eclipse. :p
 
ADA3700DAA5BN
KAB2E 0532XPMW
1303017H50445

max stable OC 3ghz @ 1.55 +104% vcore / loads temps 42c (under water - topless)

*********************

OSA175DAA6CD
CCBWE 0550UPMW
1387356L50816

max stable OC 2.75ghz @ 1.525 +104% vcore / loads temps 40c (under water - topless)

**********************

OSA170DAA6CD
CCB1E 0550VPMW
1387678L50362

max table OC not known yet.. am guessing 3ghz with 1.525 +104% vcore
still testing.. at 2870 with 1.4 vcore.. will complete this when I am done testing.
 
Here are 3 socket 754's
*******************************
Venice 3000+
ADA3000AIK4BX
CBBWE 0544BAJ
X008867 K50175
258x10 @ 1.62v (bios) 1.662v (CPU-z)
Air cooling (see sig)
Abit NV8 mobo
Crucial Ballistix PC3200 DDR400 ram @ 3.0v
2.5-3-3-8 1T
34C idle / 52C load (Prime95)

********************************
Clawhammer 3400+ Rev C0
ADA3400AEP5AP
CAATC 0409VPMW
9531714 C40205
Air cooling (same as in sig)
Asus K8N4-E Deluxe mobo
2.5-3-3-8 1T
Ultra OC'ing ram PC3200 DDR400 ram @ 2.8v
218x11 @ 1.55v (bios) 1.52v (CPU-z)
40C idle / 52C load (Half-Life Deathmatch) never Prime95'd

********************************
Clawhammer 3700+ Rev CG
ADA3700AEP5AR
CAA2C 0441GPMW
1129022 J40049
Air cooling (same as in sig)
Asus K8V mobo
Ultra OC'ing ram PC3200 DDR400 ram @ 2.8v
2.5-3-3-8 1T
215x12 @ 1.60v (bios) 1.568v (CPU-z)
35-39C idle(depending on ambient air temp) / 52C load (Half-Life Deathmatch) never Prime95'd
 
I already mentioned to you how I'm getting the 170 soon enough, it's in transit now, so once I get it, I'll jot down those #'s, and I'll record my dismal Winchester's #'s and such.
 
I just received my skt 754 3200+ Venice. I'll post some results as soon as I get it installed (its on my desk here at work ATM).
ADA3200AI04BX
NBBWE 0605UPMW
Q415986A61879
I wish they would have released it sooner (produced the 1st week of Feb '06) but I'm not complaining. I waited a month for trhe price to drop. :D
 
You must log in or register to reply here.
Back
Top