I need some serious help. Please help me...

zamardii

2[H]4U
Joined
Nov 22, 2004
Messages
3,106
Okay, long story short, my old computer went bad. So, I have to order and put together a inexpensive one. I want to keep my videocard which is a 6800 GT, but is AGP. So, I ordered a motherboard, hard drive, new processor, and memory.

Now here's the problem, the 320gb. hard drive (http://www.newegg.com/product/product.asp?item=N82E16822136098) I ordered for $99 from newegg is SATA 3.0 Gb/s, and the motherboard (http://www.newegg.com/product/product.asp?item=N82E16813130064) says under storage devices, SATA 1.5 Gb/s "2." So, I called my buddy and he said the hard drive I ordered will not work with the motherboard. So I just thought that since Serial ATA150 was older technology, it would be cheaper, but no. I search newegg for a hard drive that will work with that motherboard, and I get 1gb/ $1?! So, a 160gb. one costs $125. Wtf?

So basically the way I see I it is i'm screwed b/c there are no motherboards that support AGP video cards, that are CPU socket type AM2, and work with SATA 3 hard drives. I need some help as far as what I should do, b/c either way i'm going to have to send something back. I'd really appreciate some help.

Thank you all.
 
Send your friend back, most SATA 2 drives are backward compatable.
 
yup they should be backwards compatible, my wd caviar 200 gb has a jumper setting to only use sata 150, even though i don't need it.
 
Really? Oh man, fellas, if that's true that would be like a huge weight off my shoulder b/c I was just about ready to RMA about $500 worth of stuff. Is there any way to be sure? Tell me this then, if that is true, then why the hell is Serial ATA150 stuff so much more expensive? It makes no sence.
 
I actually just found this in a customer review:

Cons: There is a tiny little jumper that you have to remove to get 3.0 functionality and it can be a pain. There was a hiccup where in the process of removing one of the jumpers the tiny pins bent enough to touch and the array wouldn't do anything so we had to scoop it out and fiddle with the pins.



So i'm assuming if I don't remove it, then it'll be fine?
 
I actually just found this in a customer review:

Cons: There is a tiny little jumper that you have to remove to get 3.0 functionality and it can be a pain. There was a hiccup where in the process of removing one of the jumpers the tiny pins bent enough to touch and the array wouldn't do anything so we had to scoop it out and fiddle with the pins.



So i'm assuming if I don't remove it, then it'll be fine?

You're worse than my grandma for worrying.

It will be fine.
 
Thanks everyone. lol. I don't worry too much, it's just the first time I ordered all these components for myself, so I just wanted to be 100% sure it would work. Thanks everyone! :cool:
 
Back
Top