• Some users have recently had their accounts hijacked. It seems that the now defunct EVGA forums might have compromised your password there and seems many are using the same PW here. We would suggest you UPDATE YOUR PASSWORD and TURN ON 2FA for your account here to further secure it. None of the compromised accounts had 2FA turned on.
    Once you have enabled 2FA, your account will be updated soon to show a badge, letting other members know that you use 2FA to protect your account. This should be beneficial for everyone that uses FSFT.

I need help OCing i7 920 for streaming.

mEclipse

n00b
Joined
Dec 6, 2012
Messages
4
Need help overclocking. Going to be streaming on www.twitch.tv using Xsplit. Xsplit is extremely taxing on CPU resources, so I was hoping to eek out the last bit of performance that I can. Was wondering which CPU cooler I should get for my i7 920, and how to go about overclocking it since I'm new to OCing.
 
Noctua NH-D14 , if your case can fit it. Good luck on overclocking I have 930, 950 and a 960. Only the 930 will overclock over 3.8ghz with out too much voltage. What memory do you have and what is your motherboard. I just got an evga classified 3 e770 board, I am running the qpi at 200 and cpu multiplier x21.0 for 4.2ghz with the 930 watercooled.
 
Don't know much about it all that stuff, but I used CPU-Z and ill type out the details.

Motherboard:
Manufacturer: Gateway
Model: TBGM01
Chipset: Intel X58
Southbridge: Intel 82801JR (ICH10R)
LPCIO: ITE IT8720

Memory:
Type: DDR3
Size: 12288 Mbytes
Channels: Triple
NB Frequency 2132.8 MHz

I'm sure some of these are irrelevant but like I said I'm not very good with this stuff, reply if there's something I'm missing here.
 
So I'd probably need a new board? If that's the case can anyone help me out with one? That's one thing I actually don't know anything about.
 
I have a couple EVGA Classified motherboards that I think I listed for sale :p Very good at overclocking :D

About your chip, depending on which stepping it is, the 920 was one of the best fixed core clock CPUs around for OCing, especially the "D: stepping ones. You manipulate the BCLK in the BIOS, or in software, depending on your board. Gateway's are NOT known to be good overclockers ... umm, exactly the opposite actually :(

Noctua's are good but ugly :eek:Thermaltake Frio OCK and Frio Extreme are as good or h better HSFs IMO. Or buy a used corsair or Thermaltake enclosed loop water coolers (even better and take up less space)

2 EVGA classifieds and I think a CPU cooler or two buried somewhere in this list. Core i7 980x too :D

http://hardforum.com/showthread.php?t=1708702
 
Last edited:
Noctua NH D14 is the way to go. I've got mine OCed to 4.3ghz for 2 years now. don't be afraid to apply voltage. It won't even cough until 1.37-140. it's a sturdy rugged processor.
 
With the locked down motherboard, you still might be able to use a Windows based OC utility... might get you to 3ghz.

I would not buy a brand new X58 board at this point in time, if anything i would go used. Check the FS/FT Forums


Also, i'd recommend the CM Hyper 212 +/Evo , if you are looking for a cost effective heatsink.
 
Last edited:
Back
Top