I had no idea EVGA made zero-clients...

Yep, we use a few of those at work, mostly we use Leadtek PCoIP zero clients (just about to deploy ~200 of them)
 
They were also one of the first companies to make a PCoIP Hardware Offload Card :)
 
EVGA or Leadtek ?
I think Connexxus was almost the first company to make the PCoIP host cards with the Teradici chips...were running about 750+ of them

(hardware offload card?)
 
What does that offload card do?

Basically it is hardware acceleration for the PCoIP protocol. Typically, it is the job of the VM to do the work of compression, etc. for the protocol. With multiple screens and lots of pixels moving, it can consume a bit of CPU (depending on your PCoIP settings). The offload card will dynamically take the 64 most active displays and do the work in hardware instead of the VM having to do it in software. The end result is lower CPU utilization on the host, which can then in turn let you increase VM density. The cool bit is that it's all dynamic, there is no impact to the client when the hardware takes over for a display or gives it back to the VM. This means the card can always accelerate the displays that need it, and only when they do.

Unfortunately I cant use them yet as they haven't yet released the mezzanine version that I would need for our blades.
 
the PD02 is really nice - alternatively the dell FX 100 is also very nice


i think doug @txcesssurplus.com might have 1/2 left - they are fx100 dell refibs without the power cord
I'm about 90% certain this is a compatiable power supply - ebay "ADP-36CH" but make sure it's 12v @ 3A =36WATT and also Int. Diameter: 2.50mm
Ext. Diameter: 5.50mm
 
Back
Top