hx520w and hd5850

lion1750

n00b
Joined
Oct 7, 2009
Messages
3
Hi, I recently decided to upgrade my graphics card from a 8800gts to a 5850. When I received the card I put it in my computer and it would not post. All of the fans would spin and the 5850 fan would spin at 100%. I put my 8800gts back in and it worked fine.

I tried my 5850 in my roommates computer and the card worked just fine. I had previously thought that my power supply would be more than enough to handle my card just fine, so I came to the conclusion it was a motherboard issue (an asus p5k-e.)

I was thinking about upgrading to an i5 anyway, so I decided to go ahead and just upgrade. I received my new parts today, an EVGA P55 SLI mobo, i5, and 4GB of memory. I put everything together, and I still have the same problem. I've come to the conclusion that it's my power supply, since the only old parts in my computer are my power supply and hard drives, along with my case.

Should my hx520w be capable of handling my 5850? If so is there some problem with my power supply or is it some other issue?

Thanks.
 
How much other stuff in your system, fans, hard drives and other? I would guess an i5, 5850, two hard drives and a few fans would run on a good 430-450 watt power supply and be fine with a 520.
 
Unless your PSU is faulty, it would be plenty for your system. See if you can borrow your roommate's PSU for a few minutes and try that with your rig to see if it will boot.
 
Yeah we're going to need a lot more details on your computer system to figure out what might be wrong here.
 
I don't have a bunch of other stuff in my computer. Here's my complete system specs.

i5 750
EVGA P55 SLI
OCZ Obsidian 4GB (2 x 2GB) DDR3 1600
SAPPHIRE HD 5850
corsair hx520w power supply
creative x-fi extreme gamer (ive taken this out to eliminate a factor)
2 x 250GB hard drives
Samsung DVD burner
I have 4 fans in my case, two 120mm and two 92mm fans.

I'm going to try my roommates psu today, he has the corsair hx620w, so besides the extra 100w the only other difference is there is 50A instead of 40A combined on the triple 12v rails.
 
The difference is that if your PSU is faulty and his isn't, you'll be able to find that out. And if it still doesn't work with his PSU, then you know the issue is something else.
 
Back
Top