Hows this system?

fattybear

Limp Gawd
Joined
Aug 14, 2004
Messages
189
LITE-ON 20X DVD±R DVD Burner With 12X DVD-RAM Write Black SATA Model LH-20A1S - Retail

LIAN LI PC-A12 Black/ Silver Aluminum ATX Mid Tower Computer Case - Retail

Seagate Barracuda 7200.10 ST3320620AS (Perpendicular Recording Technology) 320GB 7200 RPM SATA 3.0Gb/s Hard Drive - OEM

EVGA 640-P2-N821-AR GeForce 8800GTS 640MB GDDR3 PCI Express x16 HDCP Video Card - Retail

CORSAIR CMPSU-520HX ATX12V v2.2 and EPS12V 2.91 520W Power Supply - Retail

G.SKILL 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400PHU2-2GBHZ - Retail

MSI P6N SLI Platinum LGA 775 NVIDIA nForce 650i SLI ATX Intel Motherboard - Retail

Intel Core 2 Duo E6600 Conroe 2.4GHz LGA 775 Processor Model BX80557E6600 - Retail

ARCTIC COOLING Freezer 7 Pro 92mm CPU Cooler - Retail

Any suggestions to add? Also, I was wondering if the thermal material that comes pre-applied on the AC7 is good enough, or do would I need to scrape it off and put AS5 on it? I'd like to try and hit 3.2ghz or so
 
I was wondering if the thermal material that comes pre-applied on the AC7 is good enough, or do would I need to scrape it off and put AS5 on it? I'd like to try and hit 3.2ghz or so

I won't comment on the rest of the system as I'm not very knowledgable into the intel side of things (sorry), but if you're going to OC then you'll definitely want to ditch the gunk they slap on the heatsink. For the couple dollars it costs for the paste I'd not want to take a chance with a $220 processor. And quite frankly, I never use the pre-applied stuff as I don't trust it.
 
Looks good to me. As for the thermal paste on the AC7, it's pretty good. It's keeping my E6400 OC'd to 3.2Ghz at 45C idle and 54C under load.
 
Don't know what screen resolution you plan on playing in but I've seen some benchmarks that show there isn't much difference in performance between the GTS 320 and 640 unless you start playing at higher resolutions.
 
I won't comment on the rest of the system as I'm not very knowledgable into the intel side of things (sorry), but if you're going to OC then you'll definitely want to ditch the gunk they slap on the heatsink. For the couple dollars it costs for the paste I'd not want to take a chance with a $220 processor. And quite frankly, I never use the pre-applied stuff as I don't trust it.

So, these HSF manufacturers sell these nice, high priced units to improve cooling, but use junk TIM? I don't think so. What would be the point of selling such a nice heatsink if it was rendered useless by the TIM they provide? While AS5 is great, it will probably only decrease temps by a few degress if any over the stock TIM on most high end coolers. I'm not saying you have to use the included TIM, I'm just saying its not as bad as some people think. Anyhow, I'd pickup some AS5 still, because when you remove that HSF, you'll need to clean off the used stuff and apply a new layer.

Don't know what screen resolution you plan on playing in but I've seen some benchmarks that show there isn't much difference in performance between the GTS 320 and 640 unless you start playing at higher resolutions.

I'm not sure if the resolution matters as much as the detail settings you play at. I read an article a month or so ago that showed performance between the two were similar at certain resolutions, but the 640MB would outperform the 320MB when AA/AF were turned up.
 
Back
Top