Hows this system?

fattybear

Limp Gawd
Joined
Aug 14, 2004
Messages
189
LITE-ON Combo Drive Black SATA Model SHC-52S7K-05 - OEM

LIAN LI PC-60BPLUSII Black Aluminum ATX Mid Tower Computer Case - Retail

Seagate Barracuda 7200.10 ST3320620AS (Perpendicular Recording Technology) 320GB 7200 RPM SATA 3.0Gb/s Hard Drive - OEM

eVGA 640-P2-N821-AR GeForce 8800GTS 640MB GDDR3 PCI Express x16 HDCP Video Card - Retail

Creative Sound Blaster X-Fi XtremeGamer 70SB073A00000 7.1 Channels PCI Interface Sound Card - Retail

CORSAIR CMPSU-520HX ATX12V v2.2 and EPS12V 2.91 520W Power Supply - Retail

CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model TWIN2X2048-6400 - Retail

GIGABYTE GA-965P-DS3 LGA 775 Intel P965 Express ATX Intel Motherboard - Retail

Intel Core 2 Duo E6400 Conroe 2.13GHz LGA 775 Processor Model BX80557E6400 - Retail

ZALMAN CNPS9500 LED 92mm 2 Ball Cooling Fan with Heatsink - Retail

More specifically, will the memory POST with the DS3 on start up? And this machine should be a good overclocker, yes?
 
I'd get a larger PSU a nice 700w or higher.

And get a nice small raptor for your OS to run on
 
Personally i'd either get the 8800 GTX or dual 7950's as well but hey thats just me.
 
LITE-ON Combo Drive Black SATA Model SHC-52S7K-05 - OEM

LIAN LI PC-60BPLUSII Black Aluminum ATX Mid Tower Computer Case - Retail

Seagate Barracuda 7200.10 ST3320620AS (Perpendicular Recording Technology) 320GB 7200 RPM SATA 3.0Gb/s Hard Drive - OEM

eVGA 640-P2-N821-AR GeForce 8800GTS 640MB GDDR3 PCI Express x16 HDCP Video Card - Retail

Creative Sound Blaster X-Fi XtremeGamer 70SB073A00000 7.1 Channels PCI Interface Sound Card - Retail

CORSAIR CMPSU-520HX ATX12V v2.2 and EPS12V 2.91 520W Power Supply - Retail

CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model TWIN2X2048-6400 - Retail

GIGABYTE GA-965P-DS3 LGA 775 Intel P965 Express ATX Intel Motherboard - Retail

Intel Core 2 Duo E6400 Conroe 2.13GHz LGA 775 Processor Model BX80557E6400 - Retail

ZALMAN CNPS9500 LED 92mm 2 Ball Cooling Fan with Heatsink - Retail

More specifically, will the memory POST with the DS3 on start up? And this machine should be a good overclocker, yes?

The Corsar XMS2 6400 memoryTWIN2X2048-6400 is not a good overclocker. It uses Promos IC's that do not overclock well.
 
If you only want to run at 8*400=3.2Ghz (with CPU and RAM at a 1:1 ratio), then the Corsair XMS sticks are fine. If you don't want to deal with a rebate, the g.skill 2GBNQ kit posts fine on first boot with the DS3 - I've used them in several builds. They can reach DDR2-900. I'm not sure how high the Promo's reach, but I'm sure someone else can tell you.

And the Corsair 520W PSU is perfect for your system. You don't need 700W. I don't see an SLI/Crossfire board, so a dual card setup isnt possible with this system unless you change the board. Even then, a Corsair 620W can handle 8800GTX's in SLI, so theres still no need for a 700W. With the PSU, its all about efficiency and quality.

You've got a good build goin there. If you do want a raptor, get the WD3600ADFD and keep your Seagate 7200.10 for storage. This way, you get speed and storage (instead of getting a 150GB raptor).
 
Looks solid to me. I've been spec-ing out a new rig and it looks pretty similar to yours. It looks real solid and should be a decent overclocker too, depending how far you can push the RAM.
 
Thanks for the advice. Does the G.Skill overclock better than the XMS2? If not, what is the best bang for the buck overclocker that will post on a DS3? Seems like the G.skill would be it.
 
I got the G.SKILL and it runs fine so far. I had it at 400mhz which is pretty much stock for the ram. That got my E6400 to 3.2ghz.

My opinion? Looks like a good rig to me. I cant really tell you how the ram overclocks because like I said I haven't tried mine at more than 400mhz. You should probably get a bigger power supply. I heard the 8800's use quite a bit of power.
 
The HX 520 is perfect. It's no normal "520w" psu. It has more power than most 600, even some 700w psu's. Top notch quality, silence, and modular too. The only thing? It's only $90 at buy.com shipped.
 
The G.Skills I used on my mom's system reach 453Mhz (DDR2-906). Hopefully someone can shed some light on how well the XMS sticks OC (using promo ics).
 
Quote from a Newegg review:
With a ds3 (p965), found stability at 800 3-3-3-8 2.0v, 1000 4-4-4-12 2.2v. Not bad.

Guess there is no compatibility problems.
 
I'd get a larger PSU a nice 700w or higher.

And get a nice small raptor for your OS to run on


Yups! Definitely a higher power supply like maybe a PC Power and Cooling E Silencer 750 watt is good. The Raptor 10,000 rpm drives are fast. Even on the desktop clicking around you can tell the difference. The big capacity 7200 drives to be used as a secondary drive.
 
Yups! Definitely a higher power supply like maybe a PC Power and Cooling E Silencer 750 watt is good. The Raptor 10,000 rpm drives are fast. Even on the desktop clicking around you can tell the difference. The big capacity 7200 drives to be used as a secondary drive.

For the last time, the HX520 is sufficient! I saw somewhere the 520 running SLI 8800s, although it was pushing it a little bit, but you're not going SLI. It's modular, too. I also don't think the Raptors are worth the money, although if you want to spend it, hey, go right ahead...

Bigger, flashier numbers do not mean anything. Does anyone want me to say "OMG GIGAHURTZ!!!!!!!1111oneone"
 
The Corsair HX 520 is PERFECT for his rig.

And yes, the HX 520 has been tested, by redbeard (corsair rep here), for 8800GTX SLI

Do NOT doubt the power of a good power supply.
 
Yeah, I'm sticking with the Corsair. Also probably going to go with the Buffalo Firestix for memory.
 
The Patriot DDR2-800 2GB LLK sticks also use micron ICs, if the Firestix are oos.
 
Back
Top