How to make pc reboot when it looses power...

DarkCyber

[H]ard|Gawd
Joined
May 14, 2003
Messages
1,273
Ok, I have a pc with a Foxconn 650/651 M02 Series motherboard in it and I run a Halo game server on it. It is remotely located and it is on a ups. But when the power is out for a long enough period and the ups drains down..the pc dies. Is there anyway that I can fix this so once the power comes back on the pc will boot back up?

Thanks!
 
Never used that board, but in several other brands, there is an option in the bios to "autorestart" after power loss. Usually in the power management pages of the bios.
 
So that's exactly what it should be called? I've looked in the manual and don't see anything like that. This is the closes stuff to something like that:

* Wake on LAN, USB, keyboard & mouse
* STD (Suspend-to-Disk)
* STR (Suspend-to-RAM)
* SuperRecovery, SuperBoot, SuperBIOS-Protect
* BIOS SuperSpeed, SuperStep, SuperUpdate

So, guess the board will not do it :(
 
i think u might just have to drive to the location, walk or call someone to do it for you man. :(
 
DarkCyber said:
So that's exactly what it should be called? I've looked in the manual and don't see anything like that. This is the closes stuff to something like that:

* Wake on LAN, USB, keyboard & mouse
* STD (Suspend-to-Disk)
* STR (Suspend-to-RAM)
* SuperRecovery, SuperBoot, SuperBIOS-Protect
* BIOS SuperSpeed, SuperStep, SuperUpdate

So, guess the board will not do it :(

Go into the BIOS and look around. There is probably more in the BIOS than the manual shows. With some boards the option is labeled "Restart after A/C power loss" or something like that. You'll need to go through the BIOS to find it and it could be labeled differently. As previously mentioned, it is usually found under the Power Management options. This does not mean it will be there. I've seen it other places also.

 
Back
Top