How do you short stroke hard drives????

Sipster

Gawd
Joined
Mar 19, 2004
Messages
661
Yes I've googled but cannot find instructions on how to short stroke.....please explain!
 
lol @ dev

@lit - say if you had a 500 GB hdd and you divided it into two equal paritions, how do you know which is the outside and which is the inside....wait nm, you can just use a benchmark util.
 
Divide the disk into two partitions and only use the second one.

Actually, you got it backwards.

The first partition created will be placed at the outer edge of the disk, which is the fastest part of the disk. Strictly speaking there is no need to create two partitions at all.

Create one partition of the desired size, but smaller than the capacity of the disk, and you effectively "short stroked" the disk. The term refers to the distance the head needs to travel to read the disk. The further inward the head needs to travel, the slower the performance, especially on random access.

It's not uncommon for those who need performance to short stroke the disk to only 10% of its original capacity. Do remember that performance depends on a number of factors, and short stroking only makes sense if there are a lot of random reads and writes (i.e. transactional data, etc). If the read/write is mostly sequential and large in size, the benefit of short stroking will not be as great.
 
It's also less useful if you defrag or your programs/OS aren't constantly writing data towards the "end" of the partition when they don't need to be.
 
You do two things, keep the head travel shorter and keep use down to the outermost section of the disk which has the highest angular velocity. So take a 1TB drive, stick a 40GB partition on it, place the OS on it, and spend 99% of your time there.
 
Back
Top