Highpoint Rocket SATAIII Controller - $25 shipped

I don't get this product, PCIe 2.0 theoretically gives 500MB of bandwidth, but one of the SATA3 ports could completely saturate the bus. :confused: So in other words, you effectively have a SATA3 port or two SATA2 ports.

Not a bad deal though if you're in the market for it.
 
I guess this is for the people that don't have sata III ports on their motherboard.
 
Thanks! I bit...

I had a $25 gift card and I recently bought one of the SATA3 Corsair Force 3 drives. Unfortunately, I don't have SATA3 on my motherboard and I'm getting pretty crappy transfer rates with what I've got (about half of what everyone else is getting). Hopefully this will help, and it didn't cost me a dime! :)

Thanks a ton!
 
Thanks! I bit...

I had a $25 gift card and I recently bought one of the SATA3 Corsair Force 3 drives. Unfortunately, I don't have SATA3 on my motherboard and I'm getting pretty crappy transfer rates with what I've got (about half of what everyone else is getting). Hopefully this will help, and it didn't cost me a dime! :)

Thanks a ton!

this right here is the reason for the product


for me though, I will be upgrading in the near future when the time is right - new mobo, cpu, ram, sata 3 SSD...

If I were to use this device I would only use one of the ports though
 
I thought about upgrading the motherboard, but not that many 1156 boards had SATAIII, and I didn't think it was worth investing $150 on a dead socket.
 
I wanted to get this, but I'm afraid of the bad reviews of the product family on Newegg
 
How dependable is this RAID chipset? I bought some cheap shit Adaptec Sata II Raid card a couple years ago for around $50 (complete ripoff, BTW). It keeps degrading my 1TB RAID1 array all the fucking time. It looks small and just like this Highpoint card. I believe if you want dependable RAID1/0, you'll have to fork out some real $$$$. Onboard Intel just doesn't cut it either :(

Adaptec's RAID Storage Manager sucks, IMO. I have my eyes set on an some high end Areca card.
 
Thanks a ton!
Glad to help man :D

I wanted to get this, but I'm afraid of the bad reviews of the product family on Newegg
I've got one that came with a 3TB WD Green, I have it running in a server with no probs, works good and does what it's supposed to do.

How dependable is this RAID chipset?
Just to note, this isn't a RAID card. It's a standard SATA3 card, nice and cheap and good for new SSD's. For RAID I would go with LSI or Areca.

:cool:
 
I got my card and got it installed yesterady. This card blows.

I installed it and immediately noticed my SSD performance dropped. Benchmarks showed my throughout was cut by more than half!

I found the manufactures web site and downloaded and installed an update driver and... it got worse! I unstalled this new driver and now Windows won't boot. It was late, and I didn't want to mess with it, but wow -- just flipping horrible performance!
 
wow, guess I wont be buying it. My motherboard does not have any 6gb sata ports but from what you said, its not worth it.
 
I got my card and got it installed yesterady. This card blows.

LOL!

Of course it does.

After all the reviews from knowledgeable people and websites some still call this card an improvement.....and in some cases it may be an improvement.

But with SSDs and the newer chipsets you just paid 25.00 for a decrease in performance.

The card blows.....and blows hard. :D
 
Sounds like the PCIe x1 slot is running in 1.0 mode. Try running it in an x16 slot.
 
I found a new driver. Much better results.

Highpoint_620-oem_with_Force3.png



Here's what it was with the onbaoard Sata2 port:

onboard_ATTO.png


I lost a little bit on writes, but gained a bunch on reads.
 
Can you run the AS SSD Benchmark? Just curious to see what numbers you get with that board.

This is what I get on my C300 using an AMD AHCI driver (it was a slight improvement over the default Windows 7 driver):
LlC9B.png


On Intel boards, the read speeds are usually about 100Mbs higher..not sure if this card will give me those read speeds.
 
Last edited:
Sure; I'll run them this weekend and post them.

For anyone looking to get this card, you should realize it's an OEM card. I believe thats why the drivers have been difficult to find, and no firmware updates seem to exist for it. If you're going to invest in this card, do yourself a favor and get the non OEM. Oddly enough, it's the same price and actually comes with a Driver disk and firmware updates are available.
 
Glad you got it fixed, something didn't seem right, I was getting good results with an M4 when I had the card hooked up to an 860 before.

I just use Driver Genius. I used to go to each site previously to find all my drivers until I found this software and it found the newest and best drivers for all my components, many drivers that were extremely difficult to find from even the manufacturers sites. I highly recommend this software.
 
I'm always iffy on those Driver programs. Always seems like the sites are hoeky!

I just look in device manager at find the vender and device ID (ven_####&dev_####). Then you can google the string and you'll find some driver somewhere! Works like a champ!
 
Marvell Controller Driver 1.0.0.1036 is the one DriverGenius installed for me.
 
Last edited:
It BSOD on me, and I didn't even try to troubleshoot. I was running Win7 unactivated becuase I anticipated issues. After the reinstall, another driver BSOD got me, and I had to do a system restore. Then I installed the driver I linked and all was good.
 
I believe there are even newer versions of that driver available. Check here at the bottom to see if the dev id strings match. Also, for your possible PCI 1.0 issue, did you move it to another slot or was it just the driver issue all along? I'm kinda curious how you knew it was only a 1.0 slot (most newer boards should have 2.0 slots).
For anyone looking to get this card, you should realize it's an OEM card. I believe thats why the drivers have been difficult to find, and no firmware updates seem to exist for it. If you're going to invest in this card, do yourself a favor and get the non OEM. Oddly enough, it's the same price and actually comes with a Driver disk and firmware updates are available.
I'm not following you. I went to the link provided by Newegg for manufacturer info, then clicked support and download, then found this page which list the drivers and firmware to download.
 
Last edited:
I finally got around to play with it. So far it looks like I wasted $25.

Using AS SSD:

AMD AHCI
Driver 1.2.1.262 Read: 268.40 MB/s Write: 101.37 MB/s (write speed has gone down since I got it)

Driver 1.0.0.1027 - Read: 155.16 MB/s Write: 104.98 MB/s
Driver 1.0.0.1029 - Read: 184.84 MB/s Write: 108.96 MB/s
Driver 1.0.0.1034 - Read: 174.36 MB/s Write: 106.47 MB/s

Tried loading the latest driver from Marvell's website and the device won't start.
Used Driver 1.2.0.1003-WHQL.

Any suggestions?
 
I was hoping to get better read speeds since it did work out for Demon10000.

I updated the AMD driver to 1.2.1.296 and my write speeds went up to 135 MB/s. I'll still mess with driver on the marvell controller to see if I can get it to work with newer drivers.


edit:

Not sure if this makes a difference but when I got the box from newegg, the manual says WD SATA Host Bus Adapter but the actual card says Rocket 62x RocketRAID 62x/62xm. Also the marvel chip is a 88SE9125-NAA2.

Also, I tried a driver from the Asus website, 1.0.0.1042, and it won't start. Seems to be that anything past the 1034 won't even work.
 
Last edited:
I guess I'll try to return this to newegg....very disappointed. :(

I found a Marvel 1036 driver that installed but it still sucked. It looks like the last 3 reads on the AMD driver got close to maxing out the SATA2 bus.

IXFSB.png
5Yqdn.png
 
Back
Top